[mbdas]

Re: American type Whirlpool tumble dryer cutting out.

Hi 🙂
I’ve had a problem with one of these cutting out and it turned out to be the starting device on the motor this would cut out after bit and would not start.I removed it and cleaned the contacts up and it worked until I got a new complete motor which came with the device on it 🙂
mark

[mbdas]

Re: Whirlpool gen 2000 G2PDWI/1. reverts back back to rinse

Hi 🙂
I had one recentley were it was doing odd things and it turned out to be the pressure switch was leaking onto the NTC 💡 also NTC was 20meg
hope that helps 🙂 I changed both
mark

[mbdas]

Re: BOSCH WFF2000 PRE WASH LIGHT ON

thanks greg 🙂
ive just quoted customer for a timer/module, he going to currys 🙁
Mark

[mbdas]

Re: BOSCH WFF2000 PRE WASH LIGHT ON

Hi 🙂
Ive no feed to pump and no motor action on the very last rinse always goes faulty in the same place between last rinse and rinse hold just sits there for about 4 mins and then quickly advances to the end and the pre wash light flashers.

mark 🙂

[mbdas]

Re: BOSCH WFF2000 PRE WASH LIGHT ON

Hi 🙂
Ive been to this and no blockage pump ok 🙁 the pre wash light flashers 3 times does anyone know what that is ❓
thanks

[mbdas]

Re: BOSCH WFF2000 PRE WASH LIGHT ON

Thanks Simon 🙂
at least I will have somewere to start 😀
mark

[mbdas]

Re: DIPLOMAT ADP8242 D/W

Thanks Dave 😀
Ive been back this morning and reset it 🙂 and away it went ,customer well impressed.
have one on me :beer:
Mark

[mbdas]

Re: DIPLOMAT ADP8242 D/W

Thanks dave 😳 😳
seems a common problem I go back after the bank hol and try that 🙂

[mbdas]

Re: DIPLOMAT ADP8242 D/W

thanks again dave 🙂 can you tell me how to reset the machine 😳
thanks mark

[mbdas]

Re: LACANCHE CLUNY RANGE COOKER

Thanks Dave Ive phone them but they will not give me a price over the phone 🙁 Ive had to fax them on a headed letter first 😕

thanks again Mark 🙂

[mbdas]

Re: LACANCHE CLUNY RANGE COOKER

just been looking online for them £2500 plus and thats for a cheap one 😮 and the first question she asked me was is it a free estimate 🙂
she has given me some more numbers LG1052BCT if that helps anyone,
did you have to fit the element from the back or can it be done from inside ❓
thanks Mark 🙂

[mbdas]

Re: DIPOLOMAT ADP8322 854500015810 NTC

susted it 🙂
Can you please give me the part No for the pressure switch as it was leaking onto the NTC causing it to do all sorts of funny faults

mark

[mbdas]

Re: DIPOLOMAT ADP8322 854500015810 NTC

thanks dave
I’ve got 80.2k but not certain the exact temp 😕 but its 20Mohms so Ive got my fingers crossed
mark

[mbdas]

Re: Witchcraft?

hI
yes my brother wanted a large magnet so I gave 2 from a magnetron and it did sort it no problem i think within 48 hrs
He placed them on the pipe which sent water down a little water fall he had going

mark 🙂

[mbdas]

Re: Witchcraft?

HI 🙂
I gave my brother 2 magnets out of a old magnetron and he has put them on top of the hose that circulates the water in his fish pond to stop the water from going green and it seems to work

mark

[Author]

Posts