megawatt

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 167 total)
1 2 3 … 7 8 9 10 11 12
  • Author
    Posts
  • February 6, 2009 at 9:00 pm in reply to: Hotpoint dryer CTD00. #276443
    megawatt
    Participant

    Re: Hotpoint dryer CTD00.

    Thanks for replies guys. Looks like its a timer quote.
    Regards,
    Mike.

    February 2, 2009 at 10:05 pm in reply to: servis m6500w-1. pump req #276010
    megawatt
    Participant

    Re: servis m6500w-1. pump req

    I use a standard PMP999. drill and bolt on.

    January 24, 2009 at 10:41 pm in reply to: ISE5 version 1 backhalf #270125
    megawatt
    Participant

    Re: ISE5 version 1 backhalf

    I keep a good recon hotpoint in the workshop for times like this. Swap it out and keep customer happy.
    Regards,
    Mike.

    December 31, 2008 at 12:54 am in reply to: Whirlpool AWO/D5706/S #272596
    megawatt
    Participant

    Re: Whirlpool AWO/D5706/S

    My saviour! Thanks for your help Chris,
    Regards,
    Mike.

    December 3, 2008 at 10:25 pm in reply to: Hoover HNL7126 dead. #270619
    megawatt
    Participant

    Re: Hoover HNL7126 dead.

    Had same fault which worked out to be broken track on the switch board.

    November 16, 2008 at 10:11 pm in reply to: hoover DS732 #268701
    megawatt
    Participant

    Re: hoover DS732

    Sounds logical. Thanks for your replys.
    Regards,
    Mike.

    November 16, 2008 at 9:53 am in reply to: Hotpoint WF door boots(1604494). #268664
    megawatt
    Participant

    Re: Hotpoint WF door boots(1604494).

    Brilliant! Such a simple solution yet vital to know. Thanks for your time,
    Regards,
    Mike.

    October 31, 2008 at 9:55 pm in reply to: Hotpoint WF series #266745
    megawatt
    Participant

    Re: hotpoint wf

    Had the same problem once. Found slight play on rear motor mount. Got rid of play with insulation tape which cured the problem.

    October 20, 2008 at 8:41 pm in reply to: whirlpool awz412 door #265666
    megawatt
    Participant

    Re: whirlpool awz412 door

    Loose screw inside door trim?

    July 27, 2008 at 5:04 pm in reply to: hotpoint wt741 #258317
    megawatt
    Participant

    Re: hotpoint wt741

    Check motor mounting at forward position.
    Regards,
    Mike.

    July 24, 2008 at 9:28 am in reply to: ISE labour charge rates. #258314
    megawatt
    Participant

    Re: ISE labour charge rates.

    Thanks for the reply Jim, but this is repairs inside the 5×5 paid by ISE.

    April 19, 2008 at 11:03 pm in reply to: CL311 otter thermostat. #249735
    megawatt
    Participant

    Re: CL311 otter thermostat.

    Thanks for your time Chris,
    Regards,
    Mike.

    December 27, 2007 at 9:47 pm in reply to: Hoover HNWL 3136S. #237942
    megawatt
    Participant

    Re: Hoover HNWL 3136S.

    BINGO!!!
    Connect say they do not do it. Plug the number in and there it is.
    Thanks very much,
    Mike.

    November 14, 2007 at 10:24 pm in reply to: Hpt WD61 Timer connections #233805
    megawatt
    Participant

    Re: Hpt WD61 Timer connections

    I have a WD51. If you need info give me a ring after 6pm.
    Mike(01983 564835)

    November 13, 2007 at 5:42 pm in reply to: ISE2 wash times. #233792
    megawatt
    Participant

    Re: ISE2 wash times.

    Thanks,
    Mike.

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 167 total)
1 2 3 … 7 8 9 10 11 12