Micky 32

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 279 total)
1 2 3 4 … 17 18 19
  • Author
    Posts
  • June 23, 2015 at 3:51 pm in reply to: Whirlpool ADP7409 851156115892 Fault F6 #427058
    Micky 32
    Participant

    Re: Whirlpool ADP7409 851156115892 Fault F6

    Cut the wires back a bit and Try soldering the wires directly on the sensor and see if it improves.Worked a few times for me. Plug connector might not be great.

    May 27, 2015 at 8:33 pm in reply to: Tricity Bendix TBDW42 dishwasher #427659
    Micky 32
    Participant

    Re: Tricity Bendix TBDW42 dishwasher

    Hi Dave , received PM. Thank you, really appreciate it ;-). Must be a board fault. Everything clean and dry as a bone down below..

    May 12, 2015 at 12:53 pm in reply to: Belling oven identification #427239
    Micky 32
    Participant

    Re: Belling oven identification

    No checked , frustrating. Hardly a 786?

    April 14, 2015 at 12:18 pm in reply to: Old Hotpoint condenser dryer #426511
    Micky 32
    Participant

    Re: Old Hotpoint condenser dryer

    Thank you very much Wizard, you’re a life savewr 😉

    April 9, 2015 at 9:31 pm in reply to: white knight cl767 belt #426406
    Micky 32
    Participant

    Re: white knight cl767 belt

    Done a Nordemende( White knight insides) one recently, didn’t think it was to bad to do..takes a bit of time though..

    April 7, 2015 at 9:14 pm in reply to: Pulsing Whirlpool dishwasher #426354
    Micky 32
    Participant

    Re: Pulsing Whirlpool dishwasher

    Thanks Dave, just took it out and it’s only reading half it’s value.

    January 21, 2015 at 12:56 pm in reply to: Beko washing machine heater fault #423897
    Micky 32
    Participant

    Re: Beko washing machine heater fault

    Possibly play in the drum hitting the element damaging it? Seen it happen on other washing machines.

    November 30, 2014 at 12:41 pm in reply to: Candy D/W CDI 22E10 80 integrated #422038
    Micky 32
    Participant

    Re: Candy D/W CDI 22E10 80 integrated

    Did you check if the wash pump impellor isn’t blocked with stuff? I have gone to a few Candy’s with this problem. If it is blocked it can reduce pressure and might not activate the pressure switch, that’s if it is the same set up as the 1012..

    October 18, 2014 at 1:13 am in reply to: 680uf 10v capacitors #420273
    Micky 32
    Participant

    Re: 680uf 10v capacitors

    What about these?

    http://uk.rs-online.com/web/p/aluminium … 3039363526

    October 18, 2014 at 1:01 am in reply to: Zanussi dishwasher transformer #420525
    Micky 32
    Participant

    Re: Zanussi dishwasher transformer

    Thanks Jem, you’re a star 😉

    September 26, 2014 at 9:45 am in reply to: Fagor LFU-65IT dishwasher #419649
    Micky 32
    Participant

    Re: Fagor LFU-65IT dishwasher

    That’s what i was figuring anyway, it’s a good bit away didn’t want to be spending more money and time on an old dishwasher, i’ll give it a shot, thanks for the reply.

    August 28, 2014 at 9:06 pm in reply to: bosch waq 24460gb01 f18 #418168
    Micky 32
    Participant

    Re: bosch waq 24460gb01 f18

    Seen one the other day same fault, pressure chamber pipe was clogged

    August 28, 2014 at 8:58 pm in reply to: CandY GO FS 262 Washing machine-flashing lights #418397
    Micky 32
    Participant

    Re: CandY GO FS 262 Washing machine-flashing lights

    If you have checked all else i’d give the board a good soldering up, numerous times i have solved issues with this type of machine by soldering joints.

    July 30, 2014 at 1:32 pm in reply to: whirlpool adg7560/2 #417285
    Micky 32
    Participant

    Re: whirlpool adg7560/2

    m2adr wrote:hi guys
    can any one tell me how to run the service cycle on this dishwasher please ? or is this a big secret
    tony [A D Repairs Aldershot ]

    PM me your email, i might have something 🙂

    July 15, 2014 at 8:16 pm in reply to: whirlpool awor4205 washer #401094
    Micky 32
    Participant

    Re: whirlpool awor4205 washer

    Come across this problem before a few times, everytime a resistor burnt out on the board but unfortunately everytime blows again straight away once replaced. Something else on the board must cause it.

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 279 total)
1 2 3 4 … 17 18 19