[monkey]

Re: neff V6320X0GB/02 E13 Error

thanks will get a price from connect

[monkey]

Re: whirlpool adg7560/1

I dont recall seeing a flood protection switch there was no water there when I took the bottom off,this is the one with the 2 antitamper screws at the front and 2 slots at the back.

[monkey]

Re: whirlpool adg7560/1

I have changed both pumps and pcb,I am doing the repair through repaircare, I did notice on some previous posts engineers have had the same promblem but I can see that they have had reply to the posts.

[monkey]

Re: hotpoint BFV620B module

thanks

[monkey]

Re: Liesure HJA6100 Freezing in fridge

I am sure fan is working ok, freezer is fine

[monkey]

Re: Whirlpool 3RAWZ480ESQ thermal fuse

great, I posted a pne with connections, they gave me a part number for the fuse

[monkey]

Re: engineer rates

thanks guys

[monkey]

Re: Neff S5443X2GB/42 bootom sprayarm not turning

i have checked the jets the top arm works ok but there is no water coming out of the bottom arm.

[monkey]

Re: WAE24363GB/02 F21

how do reset board to clear fault code

[monkey]

Re: Maytag LDE8426GGE Rollers

do you know where I can get the parts from.

[monkey]

Re: Whirlpool 3LSC8255EQ1 Top Loader Service Manual

Hi guys
I could really do with your help on this one if someone could get back to me.

[monkey]

Re: Whirlpool 3LSC8255EQ1 Top Loader Service Manual

Hi Guys
I called again this time with the manual. When I the machine filled with water and started to agitate, I noticed that it is only going clockwise,is this normal or should it go back and forth. I did change the gearbox about 6 months ago,I also noticed that tthey did not seem any delay to allow the machine to empty of water before going into spin.

[monkey]

Re: Whirlpool 3LSC8255EQ1 Top Loader Service Manual

I have checked the springs,I have also replaced the gearbox in march because it agitating before the spin on distribution. If you any more ideas I grateful.

[monkey]

Re: Whirlpool 3LSC8255EQ1 Top Loader Service Manual

It is banging during the spin,I put this down to it spinning full of water, I called to another top loader and I watched it empty and it did not release the brake till it was empty of water.

[monkey]

Re: Zanussi DE6854 Fault codes

The fault is intermittent, when I called out the dishwasher was hot inside and had stopped with this fault code.

[Author]

Posts