[NWAR]

Re: Nardi electric oven EK95583AX tripping breaker

MGA wrote:Dave, would you be able to e-mail or fax me spares diagram and parts list please?

MGA, I’ve emailed you the diagram.

[NWAR]

Re: SMEG DISHWASHER Mod. DWF 66?

Might just be needing a reset though. Do a search for “Smeg AND reset” or “Diplomat and reset” if you need information on how to do this; it’s been posted many times before.

[NWAR]

Re: SMEG DISHWASHER Mod. DWF 66?

E8- This alarm is generated when, at the programme start, the timer card does not detect the signal coming from the alternate valve positioning.

this defect can be caused by :
-faulty alternate valve
-electric connections not properly carried out
-defective electronic card

HTH

[NWAR]

Re: Electrolux ESl 424 slight leak

Please unplug this appliance and do not use it until the fault has been repaired. Water leaking onto the motor presents a risk of fire, although more likely it would just trip the electrics.

:plug:

[NWAR]

Re: Smeg SUK92MFX5 small oven stat stuck

Simon46 wrote:adp8334 F4

Draining fault

If it’s not a blockage or a dodgy pump check the turbidity sensor at the back of the sump

[NWAR]

Re: More Training Venues

More training sessions have been scheduled for Scotland

Join in by clicking on the happy faces to find the venue that suits you best

[NWAR]

Re: Diplomat APL 3301/3 B12 Fan Element

Oven is a Brandt, genuine element 76X3719

This one here should do the job nicely

[NWAR]

Re: Penguin or Parrot

Martin wrote:Just don’t take his advice on how to ‘hot wire’ a Bosch motor OK? 😆

😆

To play devil’s advocate here I think Mike could be given the benefit of the doubt on this one. He posted posted less than 10 mins after P45; he may well have started his reply before the penguinator posted his (we’ve all been distracted during a post ourselves I’m sure, or maybe he’s not the fastest of typers or likes to check over what he’s written before he hits submit).
I doubt he reposted the info P45 had just put up intentionally, more likely he just didn’t get it up quick enough (yes yes, oo-er missus and all that 🙄 ).

[NWAR]

Re: Best Gas Cooker for £450 – £500

hmm wrote:
Is this in comparison to price or build quality and reliability?

Any other comments please guys? or recommendations on Cookers?

Thanks.

[NWAR]

Re: Best Gas Cooker for £450 – £500

don wrote:

The only other possibility to the Cannon would be the Lofra PXUD66GGI/C. These are relatively new to the UK but I have been impressed by the build factor and overall good quality. They come very well packaged too on their own pallet. You can view them here http://www.lofra.co.uk

HTH

Don

[NWAR]

Re: Patently barking mad

In light of some recent posts I’m sure that these anti-fart pants would be of use to some of you 😆

[NWAR]

Re: Smeg DWI 67.1 Dishwasher Error 7

Navillus,

I’ve moved your other post in here and deleted that thread to keep things tidy; there’s enough Smeg/Diplomat+reset threads out there already.

I’ve posted the information you were after in here as well to help you out.

[NWAR]

Re: Smeg DWI 67.1 Dishwasher Error 7

NWAR wrote:Open door

Switch on with door on/off button

Within 3 secs (before display comes on) press programme button 4 times

Lights 1 & 5 should now be flashing (if not repeat until you have this situation)

Press programme button once more and you should be left with only the 5th light flashing.

Switch off (don’t close door)

Leave for a few seconds then switch back on.

Select programme and close door

Machine should now work (stick it on a rinse – if it gets past the main fill you should be OK)

[NWAR]

Re: Smeg DWI 67.1 Dishwasher Error 7

Dave_Conway wrote:If you use the search and use this phrase (without the quotes) “diplomat and reset” you’ll find it then 🙂

Dave.

[NWAR]

Re: Smeg DWI 67.1 Dishwasher Error 7

Navillus wrote:Anybody know how to reset a smeg Dishwasher DWI 67.1, there are plenty of references about resets but I cannot find any description of how to actually carry the reset out.

Any help would be much appreciated.

[Author]

Posts