Forum Replies Created
-
Posts
-
Re: WT741G /2 Burning smell from pcb
Would it still work fine as it does with a shorted inlet valve?
I’ve noticed the wiring where its is discoloured on the connecter and blown on the old board looks to be the red and blue from the element although i’ve fitted a new element when i fitted the pcb yet still smells quite strongly of burning.
Ollie.Re: fdw20 Hotpoint Dishwasher
Yes the light is just steady, I’ve tried resetting it by holing the button and also turning the dial to reset but all that happens then is that light goes out, so you re select a prog and that wash light just comes back on again.
(Also the salt light stays on but it does look low on salt)Re: Hotpoint WT640 Washing Machine
I’ve just pulled it out again and it kicked back into life, I’ve checked the connections – all seem fine, ins res fine, only thing is I’m not sure if the drum seems to be going round too quickly during the normal wash. seems a bit back and forth and slightly quick but nothing too drastic, Any ideas?
Re: AEG D8100-1d 944171164
Any idea which Pcb its likely to be? There’s a couple on the top plus display ones etc.
Re: Miele G653SCVI Plus (27/64298268) Dishwasher
going back in a couple of days, What are you thinking if not? board failure?
Re: Miele G653SCVI Plus (27/64298268) Dishwasher
Theres no leak in the base at all, and the propeller turns freely from inside the sump and in the base. could it still be the drain pump anyway?
Re: FDW60 with the ‘Eco’ and ‘Prewash’ lights flashing
Went today seems to be working fine, I’m thinking there must be something in one of the pipes thats getting stuck intermittently. does that sound about right?
