Forum Replies Created
-
Posts
-
Re: Hotpoint WF640T : serial no 35116453 ; ” TEST ?&
It goes into test mode in exactly the same way that it comes out of test mode…….. Speak to the kids 😀 .
Regards,
Penguin45.Re: Ariston LS612STUK Rinse Aid light stuck on?
Don’t panic yet – it can take a few washes to settle down
Penguin45.
Re: Neb stainless steel gas hob spare part
spares@ukwhitegoods.co.uk will be able to source the parts you need, but they will need tha actual model number of the appliance. If this is not in your user book, you will need to look at the underside of the hob for the rating label.
Regards,
Penguin45.Re: SMEG DISHWASHER MOD DWF66
Sounds more like power supply breaking down – board fault in effect.
Chris.
Re: Bosch dish washer tripping ELCB
Most likely broken/damaged wiring in the door down by the hinges. Awkward to repair properly – new wire should be spliced in. If you’re not confident, click the link below for an engineer. Power off if investigating further.
Regards,
Penguin45.Re: Prima LPR600 problem
Sounds like the circulation pump is not cutting in – the humming noise could well be power getting to the motor, but it’s not responding. Possible fault is motor jammed/blocked or start/run capacitor failed.
It’s an integrated Whirlpool-built machine, so particularly awkward to work on – time for pro help? Click the link below for an engineer.
Power off if investigating further.
Regards,
Penguin45.Re: adp 8112 error coeds
All five flashing is not a valid error indication, so the digiboard itself may be faulty. Try the rest procedure first, it may clear it – if not engineer time as it can be tricky to diagnose exactly with these.
If you type Diplomat and Reset unto the search facility there are plenty of references explaining how to do it.
Regards,
Penguin45.Re: Bosch Dishwasher not draining
The invisible bit of glass in the drain part of the matrix……………………
Chris.
Re: bosch shv43a03gb/17
Underfilling is the other one that’ll do it – transfer hose from the fill matrix chokes up.
Chris.
Re: faulty neff fan oven ref, fd8003 / b132owogb/01
Timer must show a time and be set to manual for oven to operate….
There is a one time thermal safety device (p/no 151326) in the back which may have failed.
Power off when investigating.
Regards,
Penguin45.Re: Indesit W103UKBG Overfilling – module?
There’s an array of transistors in a nice neat little line on these boards. If you track the wiring back from the valve to the edge connector, you can work out which one is used to switch the open valve and change it for the princely sum of 37p – or rob one off the duff board we all have kicking about in the van somewhere.
Customer is always impressed 😀 .
Chris.
Re: remove thread?
Hmm, seems to have concluded on a concilliatory note. Gonna lock it while we wait for the Goat to be sent to the headmaster.
Chris.
Re: remove thread?
http://www.ukwhitegoods.co.uk/modules.p … ic&t=11548
A slight lack of decorum
Running in this forum…….Thought GB should know better by now……
Chris.
