Forum Replies Created
-
Posts
-
Re: F&P GW709AU
Fault code 50 – specifically a Hot valve fault. Secondary fault can be cold valve, but this is almost always a motor controller board as well……
Cold valve – 420148
Hot valve – 420147Keep it on one thread please – there’s only three of us who can answer the problem and we do manage to keep up 😀 .
Regards,
Penguin45.Re: AEG Lavamat L12700ViT dryer problem
There should be a manual reset thermostat in the top somewhere. Look for a red push button. Power off before sticking fingers in.
If there has been a trip out, it will be because of lack of airflow caused by the belt coming off. A new one is part number 1240827-30/1; an email to spares@ukwhitegoods.co.uk should you wish to order.
Regards,
Penguin45.Re: Hotpoint Dishwasher DWF61 rinses continuously
That should say “Bent internal circlip pliers”………
Chris.
Re: BOSCH WFF2000UK – Programmer –only works ‘manually’
Especially if it stops at the teeny weeny blue dot on the programme indicator dial………..
Penguin45.
Re: Indesit Evolution 1600 WE16S – F-02 Error????
Reading your posts, I think you’ve made your own mind up. You’d do better scraping up an extra £50 – there are more quality options when you hit that mark. If you use the search facility, you’ll find pages of Indesit/Ariston faults, an awful lot of which are not economically solvable.
Move on and remember, you do get what you’re prepared to pay for.
Good luck,
Regards,
Penguin45.Re: Necht Dishwasher
No drain in the time allowed. Is it empty? The noise may well be the drain pump running continuously. By the same token, if the drain pump is running continuously, the base may be flooded. So, find the blockage or find the leak.
Power off if investigating or click the link below for some pro help.
Regards,
Penguin45.Re: Fisher & Paykel Smartdrive 708 Won’t wash
May not be a problem – the electronics will remember the “last fault” for up to 8 washes.
Good luck with it.
Regards,
Penguin45.Re: Bosch WFO2465GB/01 w/m
The top section works on a cross over flow system – it gets blocked up. You can prick it out from below, or you may need to pull it apart – the roof insert can be pulled apart if it’s really bunged up.
Chris.
Re: Rangemaster 110 element
I think if Dave has to say “serial number, it’s in the warming drawer” about one of these once more he’ll go nuts………….
Chris.
Re: Tricity Bendix Multi cooker
It has a digit missing. Please, just tell us which version you’ve got and we’ll sort it for you.
94652304201 – SI520B (Brown)
94652304200 – SI520B Edition 5 (Brown)
94652304301 – SI520W (White)
94652304300 – SI520W Edition 5 (White)Regards,
Penguin45.Re: F&P Smartdrive GW508 – Pump always on & won’t fi
Hi Simon.
The motor board is the lower one of the two in the fascia panel. To perform continuity testing you will need a multimeter and the know-how to use it. If you are not sure, please get pro help – the computer boards are expensive and a mistake would be unfortunate…….Regards,
Penguin45.Re: General Electric WMA8852RBMMWW fill valve
You could have a word with JLA on 01422 824444 – should be able to come up with something generic.
Chris.
Re: Neff Oven Stopped Working
Limiter – p/no 151326, about £7 + vat IIRC. Email to spares@ukwhitegoods.co.uk for ordering and confirmed pricing.
Regards,
Penguin45.
