Forum Replies Created
-
Posts
-
Re: Homark hob ignition required
Only you know the hob’s model number. What you do is slip the oven out of the housing (undo the security screws first), then crawl in and look up………
Without it you have very little chance of finding the part you require, so many models over the years…………
Regards,
Penguin45.Re: Servis m3024 wont spin
Have a look at this:
http://www.ukwhitegoods.co.uk/modules.p … age&pid=57
Also, check belt tension – it should be extremely tight – none of the old 1/2″ deflection on the longest run. It will also refuse to spin if it thinks it’s full of water.
Beyond that, it will be a rather more technical problem and Pro help might be your best option.
Regards,
Penguin45.Re: Zanussi Aqua 1250 intermittent spin
Thanks. This machine uses two separate water level (or pressure) switches, which are operated by the displacement of air. One is fed from an air chamber mounted on the side of the tub to filter box hose, the other from a chamber on the top of the filter box itself. Either or both are prone to choking with debris thus restricting the air flow. They will probably need stripping and thoroughly cleaning.
Power off if you’re going to have a go yourself. :plug:
Regards,
Penguin45.Re: Baumatic fan oven hot heating correctly
Watch it……
Penguin45
Leedscornish(We have our pasties in Yorkshire Puds)
Re: another joke.
Gegsy, you’re a very naughty boy – go and stand in the corner ’til Ken says you can come out.
😀
Chris.
Re: diplomat adp8322 integrated dishwasher problem
No idea! The thermistor is normally in the door, the one underneath is a boil-dry stat.
Regards,
Penguin45.Re: Hotpoint 7822A – slight clean water leak
Easy fix – at the rear lower corner of the fill matrix, there is a black rubber hose that runs across the underside of the machine to the sump. This need to be removed and thoroughly cleaned out. Don’t forget to clean the spigots it mounts to as well.
Power off please :plug: .
Regards,
Penguin45.Re: Service Code i30 – AEG F80850
The flood protection system has been activated, causing the inlet valve to be deactivated. There will be a reset procedure for the valve in your users book, but given the “flashbang” occuring you may well be best to wait for the engineers.
Note that this info is based on the UK version, I can’t call up the German PNC number.
Regards,
Penguin45.Re: Freezer broken: what to do?
Regret that we haven’t repaired refrigeration for many years. Our recommended repairer is:
RSS2000
Office: 0113 2774113
Mobile: 07767 843900
eMail: MJa107211@aol.comI keep telling Michael to join, but he hasn’t to date. Please tell him that you got his details through UKWhitegoods – maybe that’ll incentivise him!
Regards,
Penguin45.Re: Brandt refrigerator shelves
Have a look for a label in the area of the crisper bins. Seriously, with the plethora of different models you haven’t a hope without it.
Regards,
Penguin45.Re: Zanussi Aqua 1250 intermittent spin
Probably to do with sludge in the water level control system. Am unable to advise more accurately without the model number. Please don’t try and push start the motor – you may well lose your fingers.
Regards,
Penguin45.Re: smeg fridge
Spares@ukwhitegoods.co.uk will be able to get one for you Wendy, but the model number is essential – have a look in your Users book, or around the crisper bins for the numbers.
Regards,
Penguin45.Re: Quotes from Multiple Posts
Success!
http://www.ukwhitegoods.co.uk/modules.p … pic&t=6170😀
Chris.
