Forum Replies Created
-
Posts
-
Re: Baumatic BDW 5
This is a Fagor-Brandt built appliance. There is no reference to a code error bringing up the lights in that pattern, so you can probably assume that the electronics are stuffed. Ain’t logical.
The site search engine is extremely efficient. Click on “Search”.
Penguin45.
Re: Siwatherm Plus 5501 thermostat
Model number, Yurtsen. WT55010/??? Are you looking at the thermostats on the heating element?
Penguin45.
Re: AEG Lavamat 72630 how good are they
It’s a Zanussi in a dress. It’ll be a whole heap more energy and water efficient than the old Hoover, but it’s a lot more complex.
Penguin45.
Re: In search of the fourth cord
OMG – he’s back……..
http://www.ukwhitegoods.co.uk/modules.p … ic&t=48600
Chris.
Re: capel wd12201
L75E00A5 – £2
L74G00A0 – £12.50 (OOS)
LA8E001K2 – £8Try sticking FGR on the front.
Chris.
Re: WHIRLPOOL ADP 5540 only pre-wash then program stop.
No drain detected in the time allowed. Check function of the WATER LEVEL INDICATOR in the sump. Prone to fatty deposits and microswitch failure.
Stay safe, power off if first.
Penguin45.
Re: diplomat ADP8322 integeral dishwasher
It’s possible that the machine is underfilling – water level should be touching the salt cap. Worth removing the filters and having a look at the water level indicator un the sump. This is the black grid at 3 o’clock. It is prone to filling up with fatty deposits, causing it to give false readings.
Failing that, THIS is worth a read.
Penguin45.
Re: capel wd12201
delta01 wrote:these parts are really expensive
Seemed quite reasonable on Masterpart to me…….
Chris.
Re: White Knight drier 427WV – noisy
……. coins, nails, hairslides, bra wires ………
It’s amazing what we dig out!
Penguin45.
Re: Whirlpool Condensing Dryer AWZ7303 Keeps Cutting Out
The front stat shouldn’t really cycle much – poor ventilation/blocked filter/condenser will restrict the airflow and cause it to operate and consequently wear out. Use a test meter to check for continuity – stat should be normally closed. If it’s open circuit, the classic position is that you smack it on the work surface and it resets to closed circuit – for a while……
Penguin45.
