PINKY

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 260 total)
  • Author
    Posts
  • in reply to: Bosch/Smeg Washer dryer? #279127
    PINKY
    Participant

    Re: Bosch/Smeg Washer dryer?

    There was a hoover for a short while, Definitely!

    in reply to: Bosch Dishwasher SGS43A22GB/01 #279210
    PINKY
    Participant

    Re: Bosch Dishwasher SGS43A22GB/01

    No seal, If its leaking it’s for the bin! The type of sealant used by the factory has changed. Draw your on conclusions!! 😉

    in reply to: BSH Group Redundancies? #279091
    PINKY
    Participant

    Re: BSH Group Redundancies?

    Had a manager re-shuffle in London with 1 manager being made redundant but that’s about it so far. Never say never 😥

    in reply to: Bosch/Smeg Washer dryer? #279125
    PINKY
    Participant

    Re: Bosch/Smeg Washer dryer?

    Intergrated are mainly Smeg used Hoover for a while. Free standing come out of China :rolls:

    in reply to: New Bosch dishwasher heat pump #278701
    PINKY
    Participant

    Re: New Bosch dishwasher heat pump

    Heater and motor are part of the same thing .Haven’t had or heard of any failures so far

    in reply to: Bosch WVD24520GB/02 Washer Dryer #278660
    PINKY
    Participant

    Re: Bosch WVD24520GB/02 Washer Dryer

    Good chance you find all is ok with the installation. Job for BSH, I’ll say no more :rolls:

    in reply to: Bosch F/F KGN39V00GB01 #278223
    PINKY
    Participant

    Re: Bosch F/F KGN39V00GB01

    Yes there is a couple of updates on this appliance. Depending on it’s age I’d refer him back to Bsh. You really don’t wont to get involved in this!! 😉 Bsh usually will honer the warranty even if just outside the two years.

    Pinky

    in reply to: Hotpoint Dwf33 pcb! Is there a Bosch equiv???? #277107
    PINKY
    Participant

    Re: Hotpoint Dwf33 pcb! Is there a Bosch equiv????

    Have to agree with Martin. Little things like pressure chambers and wiring issues.
    There not made by Bosch but parts sourced from Bosch and assembled in Wales. Least that’s what i’ve told customers for the last twenty years! 😯

    in reply to: Bosch Auto wash select problem #277128
    PINKY
    Participant

    Re: Bosch Auto wash select problem

    Sounds like a coding problem? Did you code the new pcb?

    in reply to: Bosch W/D throwing TOC. #277150
    PINKY
    Participant

    Re: Bosch W/D throwing TOC.

    Lazy fan motor use to be quite common but more likely blocked condenser. Did you take of the hose @ the bottom of the condenser?

    in reply to: prolem with bosch washing machine door gasket waa20160gb #276306
    PINKY
    Participant

    Re: prolem with bosch washing machine door gasket waa20160gb

    It usually down to a reaction with creams. Face creams or skin conditions. There is a door boot available resistant to creams etc I.ll try and dig out a part No’s unless anyone else No’s it!

    in reply to: Softy southerner winging about snow #275923
    PINKY
    Participant

    Re: Softy southerner winging about snow

    You haven’t any commitment Paul!! 😉 Got 8 done most of which were in the sticks and back home for 2!! Different story tomorrow me thinks!!

    in reply to: Engineer vacancy RG23 – Oakley area #275587
    PINKY
    Participant

    Re: Engineer vacancy RG23 – Oakley area

    RG? You taking over the world Alister?? 😉

    in reply to: neff microwave #275406
    PINKY
    Participant

    Re: neff microwave

    Door switch!?

    in reply to: Bosch WAE28162 gb/11 #275423
    PINKY
    Participant

    Re: Bosch WAE28162 gb/11

    Sounds like it Geoff but modules not really a problem on this model.Shouting out an earth fault to me or some sort of liquid damage to the board, water, mouse pee and the like.

    Think your going to be dammed what ever! 😥

Viewing 15 posts - 106 through 120 (of 260 total)