Forum Replies Created
-
Posts
-
Re: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER
At £40 and i will have to wait another week for delivery,
I might leave the hotpoint one on if it wont do any harm,
The customer wonts the machine back.
Thermister I know, IT was just smeg call it a temperature senser but i should know betterRe: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER
Thanks chris
One of the modules is just for the dryer and has feed to the heater,
Ordered one and fitted and its still the same fault,
Replaced the temperature senser with one from a Hotpoint wash heater,
It works
QUESTION Can i leave the Hotpoint senser on there or should i order the whirlpool/ smeg one. Are they calibratted in any way ?
I now have a module which cust me £75 , Will proberbly bin itRe: Bosch WTL5500 GB/01 dryer
Sorry i will keep it in just the 1 post next time, thanks that is great advice i will check that tomorrow 😀
Re: Miele w844
:salute: thanks alot i will check the wiring soon as i can, parts are so expensive for these that its scary ordering something if your not totally sure its that thanks again 🙂
Re: Miele w844
Hi that was quick thanks for the reply i did take the brushs off to have look but there was not much wear and it was very clean, it is just an old couple so it cant get used much
Re: TECNIK TKL9290 W/D spin
It was A new belt and I dont think there is any adjustment on the motor
But i will check they sent me the right beltRe: Indesit WIDL 126 UK
Thanks alot i will order a new module i am happy to know :salute: and hvala to Dragan those testers sound very handy i haven’t heard of them before i am going to look into getting one 🙂
Re: hotpoint wf340p
One of my customers rung up while i was there and just gave the model and serial numbers over the phone and that was enough which was quite good i thought if only all things were that easy 🙂
Re: Servis M6135
Thats interesting i knew problems occured with the Indesits but didn’t know with Servis, although i was testing it and was reseting in between spins. I wish i had tried the plug in another socket. This job is for a extended warranty and the company that gives us the work always choose to repair there machines no matter how many parts need to be changed so thats why i haven’t given up yet. Thanks for all the advice everyone i am very grateful :salute:
Re: Servis M6135
:snigger: u got me there for a minute i thought u were serious for anyone that isn’t familiar with these they dont have proper timers 😆
Re: Servis M6135
DOH! 😕 i was so sure tightening the connectors was gonna work but it hasn’t thanks for the advice though i will tighten the the connections when i change these modules now. The pressure chamber and switch seemed fine too. Any advice on this would be much appreciated as i am pulling my hair out :bang:
Re: Servis M6135
They were brand new ones, i normally order recon ones from EMW because they have always given us great service and advice on faults. But this is a job for a warranty company that sends us the parts so we have fitted new ones.
Re: Servis M6135
Hi i did check the pressure switch but i will check it again and the connectors when i go back thanks for the advice guys i will let u know how i get on 😀
Re: Bosch dish wires to motor
Sorry poor light, SGS43EO8GB/43
I have two whites, I had put one on the capaciter
takon it off now and put the red on,
I have two whites and a pink, should the whites be together
2 3 and 4 are linked
I have blown the fuse once so i am being carefull not to do it again in case i damage module,
I normally write colours on the machine or motor with a permanant marker
