richardable

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 390 total)
  • Author
    Posts
  • in reply to: Bosch SGS47EO2GB – not draining water #272244
    richardable
    Participant

    Re: Bosch SGS47EO2GB – not draining water

    i have recovered from the senior moment now…the drugs have kicked in..to get to the matrix, …remove the top lid of d/w….remove left side panel and all will be revealed..look at the plastic matrix and there could be a build up of food waste which stops the d/w draining…
    8)
    richard
    happy christmas

    in reply to: Bosch SGS47EO2GB – not draining water #272240
    richardable
    Participant

    Re: Bosch SGS47EO2GB – not draining water

    😳 😳 😳
    thanks jim
    having a CRAFT moment
    richard
    :rolls: :rolls: :rolls:

    in reply to: Bosch SGS47EO2GB – not draining water #272238
    richardable
    Participant

    Re: Bosch SGS47EO2GB – not draining water

    it may be the drain matrix at the back of the w/m…i am not familiar with the model but….if you can pull the machine out…power off of course, and the drain hose is at the top right hand corner, take the lid off and check the plastic matrix which is tubed to the drain pump and the drain hose is directly connected to it on the outside of the machine…even a small bit of fabric lint can stop the drain process.
    hope this helps
    richard

    in reply to: zanussi 12170w..s.no. 74600150..pn..91426105(00) #271918
    richardable
    Participant

    Re: zanussi 12170w..s.no. 74600150..pn..91426105(00)

    seamy, just got back from the zanussi, checked drain pump…ok, checked blockage in drain hose…ok, checked sump hose from tub to drain pump…bingo…plastic bag and curtain hooks…reset machine…customer has done one wash and all seems to be ok…hewill do a londer wash and let me know, then i will post …
    thanks
    richard

    in reply to: whirlpool w/m model HDW6000/WH #270693
    richardable
    Participant

    Re: whirlpool w/m model HDW6000/WH

    steve, thanks for tip, customer says machine less than 18mths old, but used every day…are the brushes likely to wear down so soon?
    richard

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260357
    richardable
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    samsung ….haven’t solved this one yet. customer has loan w/m so is ok. i’ve been away etc etc…ok..running this w/m….select any wash/rinse programme, door locks, drain pump runs, water in….drain pump runs and runs…machine in workshop so no rush at the moment but I WANT TO SOLVE IT 😈
    richard

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260354
    richardable
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    definately the drain pump…door locks, hear drain pump as water enters. the water level never reaches the bottom of the inner drum and i have the drain hose in the sink and the water just flows out..
    richard

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260352
    richardable
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    robbra. thanks for tip…i have been told that samsung have withdrawn the 2 year warranty on some appliances!!!!
    richard

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260350
    richardable
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    bob, thanks for info..on the samsung w/m .what is the cause of the drain pump running on all programs? its 16month old and has a a main board and a drain pump already…customer is not pleased..
    richard

    in reply to: diplomat f/i dw. whirlpool 8545 002 15820 #259301
    richardable
    Participant

    Re: diplomat f/i dw. whirlpool 8545 002 15820

    chris, thanks….spot on..another fix and a happy customer.
    richard

    in reply to: servis m6666 #259028
    richardable
    Participant

    Re: servis m6666

    thanks everyone….leaking soap dispenser, split, cleaned, debored, all now ok..thanks to you all who replied…much appriciated.
    richard

    in reply to: servis m6666 #259027
    richardable
    Participant

    Re: servis m6666

    thanks bill..i’ll keep an open mind and work through the suggestions.
    richard

    in reply to: servis m6666 #259025
    richardable
    Participant

    Re: servis m6666

    thanks for replies will go next week and report back.
    richard

    in reply to: zanussi c/d model..TCE7276W #253314
    richardable
    Participant

    Re: zanussi c/d model..TCE7276W

    mal. thanks..will check and report back
    richard

    in reply to: Fuel Prices #252715
    richardable
    Participant

    Re: Fuel Prices

    from the press(god bless them) it looks as though the oil cartels are not completely guilty.. the figures show that about 60{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the cost of a litre of fuel (petrol or diesel) is TAX… the market price of fuel is about 48p then add the tax, then add the vat and you get to the current pump price… we know that all the oil firms make big profits but they sell their products and HM TREASURY jump on the market and MAKE A PROFIT and do SFA except collect!! you would think that given the fabulous array of brains, culled from the best universities some one may have have noticed the flaw in the plot….LETS…A)… DO WAY WITH THE 10P TAX LEVEL. B) LETS INCREASE THE INCOME FROM THE MOTORIST VIA FUEL…C) LETS HIT HIM AGAIN AND INCREASE THE VED ON HIS CAR….all these proposals will save the planet and will be certain to get us all votes as we will be seen to be saving the planet.. oh and by the way we will be able to finance the wars in iraq and afganistan which are just and reasonable wars which both we and the americans agreed would save the world.
    grumpy and bitter
    richard

Viewing 15 posts - 76 through 90 (of 390 total)