Forum Replies Created
-
Posts
-
Re: Zanussi IZ161w
Just to finish this one for reference. Tried tightening and cleaning cable connectors and plugs, no joy. Fitted new pcb and all is well.
Re: Smeg WMI 16AAA
Yes. It’s as soon as you switch on and before you start programme. I was thinking it was the triac but I will investigate into the wiring to make sure. Thanks for the info.
Cheers RickRe: Neff U1552 N0GB/01
Sounds like it could be the wedge that fits underneath to the rear of the mains switch. Don’t forget power off!!
Re: Bosch WFO2467gb17
Might be worth checking the start switch soldered connections on the pcb. A lot of users press these touch control buttons like the old mechanical switches and break the legs or soldered joints. Re-solder to make sure.
Hope this helps.Re: Tecnik TKC830/2
Just returned from the call and model is in fact a TKCVL2/2. For some reason TKC830/2 was stuck on the side of the door. It’s a Stoves green two door job and have traced the element but still need door hinge part number.
Re: Candy C514
Thanks for the info Martin. I had removed the main module and checked it including the 4 triacs in the corner and all seemed well. The customer did say prior to this fault that she had to keep re-selecting the programme because the one she selected wasn’t tallying up with the timing led. The pdf would be very useful thanks.
Rick
Re: Tecnik TKC830/2
Yes, I found that one but the customer has double checked and confirmed it’s TKC830/2. Thanks for the reply anyway.
RickRe: Homespares
Contacted Homespare a month or so ago regarding this. There’s no quantity discounts at all, except on special offers. Had to phone my order through and they tried to match my previous prices, which they almost managed to do except I had to order £75 for free p&p. Worth a try though.
Rick
Re: Candy W/dryer part.
Thanks Chris. I need the part number for the spindle only or does it come with cam disc?
Rick
