Forum Replies Created
-
Posts
-
Re: ZANUSSI ZWN1220W MODULE
i have had loads of bother with these 1 i ended up changing the pcb,i/lock then it lit up but nothing else so changed front pcb and it started then faulted due to the analogic p/sw blown as well.nightmare
cheers chris
Re: Hoover HFA 290 ALU GB Fridge Freezer
with most of the hoover/candy machines i have worked on if you tell the cust to turn the stat to off,if it still runs the pcb is faulty which is very common if it stops then poss thermistor/short gas/module.but generallyt a pcb fault.
cheers chris
Re: zanussi zwd1427w
had a nightmare with similair machien a few months back,it turned out after i replaced the i/lock and pcb still nout the front facia was damaged after that the analogic pressure switch was duff as well.hope this helps
cheers chris
Re: hotpoint ctd40g
thats what i thought however when i went to spares company they advised 2 diff kits both with 3 stats but the original has 2,ser 509210007 so i got the correct kit for serial number with 3 stats 2 of them in the box match the 2 fitted however there is a third left but no place for it and no wires.here is the question hotpoint cant tell me why the machine has never been worked on before.
I fit the 2 out the box and it works perfect any body explain this as hotpoint cant?
cheers chris
Re: cda hob cd662ss
you will save my ass if you can mate got letting comp on all the time.
cheers chrisRe: SERVIS M0330W FF
had chattering from these boards before and sometimes the leds bounce around a bit as well.
Re: Any ideas? Candy cfmf236a fridge too cold, freezer ok!
turn the stat knob to off generally if it is pcb fault the machine will continue to run even though it is in the off position.
cheers chris
Re: SAMSUNG BIGWASH Q14331SGS/XEU
I have had quite a few front and top balance weights start to come loose on the samsungs worth a look.
Re: Small Appliance Repairs
repaired a set of ghd hair straighteners this week lady dropped in shop.Cable cost £9 quoted £29 5 min job would do a few more of those.also done a siemens wall heater which a guy dropped in the shop parts pricey but £30 lab charge and he was happy to have it fixed.
cheers chris
