robbo1973

Forum Replies Created

Viewing 15 posts - 436 through 450 (of 644 total)
  • Author
    Posts
  • in reply to: SAMSUNG Washer Q1435VGW no motor action #254222
    robbo1973
    Participant

    Re: SAMSUNG Washer Q1435VGW no motor action

    def the board at the bottom corner changed quite a few for your fault.

    cheers chris.

    in reply to: luxair #253789
    robbo1973
    Participant

    Re: luxair

    thanks mate :tup:

    in reply to: e/lux er7626b #253706
    robbo1973
    Participant

    Re: e/lux er7626b

    thanks mate

    in reply to: Lux frost free fridge freezer #249456
    robbo1973
    Participant

    Re: Lux frost free fridge freezer

    has it got a manual timer on it if so then rotate it slowly until it clicks onto defrost and so long as the evap is cold enough the heater should come on easy way to check the operation of heater o/load stat etc. if all is well make sure punter aint leaving door open or seal split air getting in.

    in reply to: SERVIS M6005 #252553
    robbo1973
    Participant

    Re: SERVIS M6005

    i also knock the water pressure down a touch and it helps

    in reply to: Neff Induction Hob #252619
    robbo1973
    Participant

    Re: Neff Induction Hob

    make sure they are using correct pans as i have been to a few where they are not.

    in reply to: Whats the most annoying thing customers do? #107562
    robbo1973
    Participant

    Re: Whats the most annoying thing customers do?

    i have had a run of idiots this last week which i wont go into as he was in MY shop telling ME what to charge him w****r and i am still raging thinking about it.
    But i had a nice old lady call me to look at her 11 year old built in creda w/d no drum action carbons lovely job i thought.Took plinth off,machine would not budge 2 screws thru the front feet,removed still does not want to come out so removes b/in freezer next to it and find 2 brackets round the back 2 legs screwed to the floor and back left pretty much inaccessable.One hour later and machine is out 3 mins after that it is fixed.Where these brackets part of the fitting kit as they where a perfect fit as i have never seen them before?
    Stroll on ❗

    in reply to: cda ci930 #251347
    robbo1973
    Participant

    Re: cda ci930

    thanx for reply whiskeyjack aint been to this machine yet as it is rental and tennant a pain to get hold of.have you seen this fault before and can you shed any more light before i go.

    cheers chris

    in reply to: ebay wonder! #251781
    robbo1973
    Participant

    Re: ebay wonder!

    went to a “brand new” teka w/m the other week under warranty when i arrived lady showed me receipt off ebay and said it has never worked. I took the back off and guess what? someone had pinched the module off appliance!!.told her to go back where she bought it.

    in reply to: cda ci930 #251345
    robbo1973
    Participant

    Re: cda ci930

    thanks for replys lads 😀

    in reply to: cda ci930 #251342
    robbo1973
    Participant

    Re: cda ci930

    a bit harsh bryan but my mistake on DRY it fills with water and i know that aint normal

    robbo1973
    Participant

    Re: Barclays Premier League 2007-2008 / Champions League

    He may have £60 million, but who’ll he sign???

    He wasted £40 million last year on rubbish :innocent:

    He built a squad buying tonnes of players which turned out to be right with survival assured with games to spare as i is a squad game to cover injuries. In the summer i think a lot less players coming for about the same money spent thou.

    in reply to: Are you quiet at the moment or is it me? #251032
    robbo1973
    Participant

    Re: Are you quiet at the moment or is it me?

    in the north east private work has been quite quiet for the past couple of weeks,on built ins we charge £40+vat+parts but if it is not installed correctly ie on bits of wood or bricks etc we will pull it out and repair but as to getting it back we make it clear that we are repairmen not kitchen fitters or in some cases magicians but we will try to get it near as damn it.learnt my lesson years ago when i was there 1 hour trying to align b/in d/w on wood and all kinds.

    in reply to: bosch wvf2402gb/02 #251113
    robbo1973
    Participant

    Re: bosch wvf2402gb/02

    i didnt make myself clear the weight is fine it had just fell off it is held on by a clamp like the old servis w/m back plates and also the front face is held on the same. it has worked fine for a few months and has fell off again.

    in reply to: whirlpool awm9199/01 #250731
    robbo1973
    Participant

    Re: whirlpool awm9199/01

    cheers for reply.any ideas on what this could mean as i dont want to order interlock and find further trouble.any whirlpool engineers out there?

    cheers chris

Viewing 15 posts - 436 through 450 (of 644 total)