Forum Replies Created
-
Posts
-
Re: Bosch SGS5302GB/07
Thanks Tim and Martin,
Transfer tube? is that the one from the matrix to the sump..It’s clear.
Didn’t look at the main pcb so will check that but as the power goes to the element through the m/switch if it’s o/c then no heat surely?
RobRe: beko 1512 taking to long
Syphoning??
40 degree eco is timed in the instruction book at 180 mins :rolls:
Good luck and let us know the outcome.
RobRe: Nardi d/w
Definitely a Antonio Merloni probably around 7-10 years old. Had problems with boards burning. M495 model no.
RobRe: Bosch Maxx100
Thanks to all. I’m waiting for the thaw now as it is frozen solid in the stable and will check for dry joints then.
Rob
Congrats Mike 😆Re: Bosch Maxx100
Hi again,
Found Enr on old report WFL100GB/12
Have around 77 volts to hot valve but it doesn’t open but the cold does (only on 30 deg) with this voltage. readings on solenoids are all the same so why won’t the hot open? Surely also it won’t only be hot fill on 40 deg upwards and the cold should open too. No prob with heater or p/sw.
Really bugging me
RobRe: Bosch Maxx100
Hi Martin,
Fills ok on rinses and is hot and cold but via a Y piece.
No E nr anywhere. It’s in a stables and subjected to all sorts of misuse and I might just walk away and give her the cheque back. I was hoping it was frozen up but alas no.
RobRe: Front Page
Ken, perhaps you have not read and understood the point of my post in which case I will explain yet again. The front page should be reserved for facts and articles, not rumour or opinion as we have trade forums for that purpose.
You may or may not be right and the fountain of all knowledge regarding the whitegoods trade but an opion is just that. Keep it in the trade section.
Well I’ve had enough of this and didn’t resort to sarcasm. I’ve made my point several times and if you don’t get it, it’s not my fault.
RobRe: Front Page
Perhaps you should read my post again as it’s about an opinion of the viability of a company employing people in a challenging economic situation. This should be reserved for the rumour mill and not on the front page of the website. Keep to facts on the front page.
Re: Hotpointsdw60 dishwasher
Hi,
in the book it refers to 4 and 7 led models, page 35 and the 4 refers to the four on the right. Had this on Friday with lights 2+4 heater and was spot on.
HTH
RobRe: Kenwood KDW243A D/W
Hi all,
Got E3 fault on same dishwasher but P45 the link is to washer codes.
Are the codes the same or am I barking up the wrong tree. Would love to get rid but part of a new contract so obliged to go. Anyone know the dishwasher fault codes?
Thanks
RobRe: Brittania & Kuppersbusch Spares
I would disagree.I find Teka very fast for parts, like next day delivery but Kuppersbusch parts cost an arm and a leg even after a hefty discount but if they can afford the products then they can afford the spares. 😆
RobRe: GB DAR
Well Christmas arrived and although 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} still more than expected.
Thanks GBD.
Rob
