[robbra]

Re: Beko WMA765s stuck at certain time readouts

Hi, Had one like this 18 months ago and it was the element but worn brushes can give spurious faults also.
Rob

[robbra]

Re: Hotpoint Indesit Tumble Dryers Scrape after fitting drum

Don’t ya just love the technical solutions forthcoming on these pages? 😆
but they normally work better than the official cures :rolls:
Rob

[robbra]

Re: First hand experience of exploding oven door !!!

I bought a New World oven 2 years ago and first use the chicken is in, I’m on the phone and a loud pop. The outer door had shattered before the chicken was cooked but the microwave came to the rescue. New World sent a new door next day and I was impressed by their quick response.Got a spare too 😆 Love the oven, simple without digital timers.
Had a couple on Kuppersbusch recently and over £150 for just the outer glass, no handles just glass and a bit of trim 😯 .
Rob

[robbra]

Re: Teka UK Bust?

Going to Repaircare from 1st April. I won’t bother to follow.
Rob

[robbra]

Re: Bosch SGS5318GB/12 Dishwasher

Think you’re right pinky and a t the price of £117+vat iot’s a non starter.
Rob 😥

[robbra]

Re: Bosch SGS5318GB/12 Dishwasher

Sorry Martin,
it was hit and miss. sometimes it would reset to 0 or start to fill or drain for ever.
Rob

[robbra]

Re: Bosch SGS5318GB/12 Dishwasher

Thanks Steve,
I cleaned the whole lot. Right from the off the red float never lifted, the m/c just started draining either immediately or after some filling.
I think it must be the pcb.
Rob 😥

[robbra]

Re: Bosch SGS5318GB/12 Dishwasher

Yes motor checks out fine. If the door is opened after filling and shut then it goes into drain mode. It seems all over the place, sometimes fill/empty at same time, sometimes fill and sit doing nothing , other times straight to drain just by switching it on.
They were discussing a Miele when I was there so may not need a cure after all.
Rob

[robbra]

Re: Bosch SGS5318GB/12 Dishwasher

Aqualectric Martin,
Had red float chamber apart and cleaned it thoroughly. Would I be looking for anything specific on the board?

[robbra]

Re: servis m6500w-1. pump req

Cheers Mike,
Been up to my supplier and we both agree its better than the orig PMP pump from SUK and a lot lot cheaper. I will try the Plaset but it should also work with the Askol.
Rob

[robbra]

Re: servis m6500w-1. pump req

Hi megawatt,
What do you screw it into? The bayonet flanges seem too small but will give it a try one day soon. Is that how you do it?
Rob

[robbra]

Re: Bosch dishwasher

Thanks Steve,
Had this fault with impellor jug pcb faulty before on a different Bosch where it would fill then empty continuously. but this is not filling and no power to the valve. Will order the part .
Rob

[robbra]

Re: Waterless washing?

Yes Martin,
but perhaps no work either 😥
Rob

[robbra]

Re: Electrolux ESL614 D/W 911871054

Thanks Jim,
I know what you mean about Vista although my laptop is much faster than my desktop, unfortunately I sold it before christmas but am cosidering a s/h laptop with XP.
TDS was a pain to get into but is a mine of information once in.
Thanks again for the part no.
Rob

[robbra]

Re: Bosch SGS5302GB/07

Hi,
went back today and it was the board with a dry joint so thanks Steve. Never knew about the pressure on the m/switch so I’ve learnt two things on this job. One day I’ll pluck up courage to get right inside.
Thanks for everyone help.
Rob

[Author]

Posts