rocker

Forum Replies Created

Viewing 15 posts - 451 through 465 (of 1,132 total)
1 2 3 … 30 31 32 … 74 75 76
  • Author
    Posts
  • September 6, 2012 at 7:25 pm in reply to: bosch SMV53M00GB/16 #380767
    rocker
    Participant

    Re: bosch SMV53M00GB/16

    Thanks for the info Martin, I will now recall and check again.
    without this info I would have walked away. great service. John

    September 6, 2012 at 5:39 pm in reply to: bosch SMV53M00GB/16 #380765
    rocker
    Participant

    Re: bosch SMV53M00GB/16

    To be honest Martin not sure how to check, as it has 3 wires in, but have tried to check voltage in via plug, but as I said I can get the reset to work to sent voltage to the pump plug, also not sure if its possible to test voltage when the plug is disconnected from pump. ( as this may in its self cause a fault) not sure!!
    perhaps you can advise as I have not seen this newer type before,as the machine is just over 2yrs old. !!
    cheers John

    September 2, 2012 at 10:01 pm in reply to: Tecnik TKL9290 (A/W) #380530
    rocker
    Participant

    Re: Tecnik TKL9290 (A/W)

    Thanks Raw. John

    September 1, 2012 at 2:18 pm in reply to: hotpoint wmf940 no motor action #380461
    rocker
    Participant

    Re: hotpoint wmf940 no motor action

    Thanks gents, for your advice will look into this. john

    August 29, 2012 at 6:36 pm in reply to: Hoover AQUALTIS AQXXF149UK #380349
    rocker
    Participant

    Re: Hoover AQUALTIS AQXXF149UK

    Thanks Bob. John

    August 29, 2012 at 3:33 pm in reply to: Indesit ids105 (D/W) #380304
    rocker
    Participant

    Re: Indesit ids105 (D/W)

    Thanks Criscold. john

    August 21, 2012 at 5:09 pm in reply to: smeg UK2010X-1 #379900
    rocker
    Participant

    Re: smeg UK2010X-1

    Thanks eastlmark. john

    August 14, 2012 at 5:39 pm in reply to: Hotpoint SDW60 (D/W) #379415
    rocker
    Participant

    Re: Hotpoint SDW60 (D/W)

    Thanks Jim & Martin for your help…Martin will p.m you if I require the service manual, I am going to look at it tomorrow.

    August 12, 2012 at 10:05 pm in reply to: Neff R4381X1GB/01 (con dryer) #379340
    rocker
    Participant

    Re: Neff R4381X1GB/01 (con dryer)

    NomadPaul. Thanks for your advice..John

    July 17, 2012 at 1:32 pm in reply to: Hoover VHV180 #378240
    rocker
    Participant

    Re: Hoover VHV180

    Thanks AMS. John

    July 10, 2012 at 6:49 am in reply to: AEG Dishwasher Leaking #377954
    rocker
    Participant

    Re: AEG Dishwasher Leaking

    have you checked the lower spray arm..to see if it has a split in the side.

    July 9, 2012 at 7:37 pm in reply to: LG WM1437RFD (Snr 611KWP00130) #377842
    rocker
    Participant

    Re: LG WM1437RFD (Snr 611KWP00130)

    Thanks for your reply, but this must be a different model
    there are no screws at the top of each corner and also there are 2 black hidden screws with a hexagon top about a quater of the way from top but cant get access !!

    July 9, 2012 at 4:01 pm in reply to: LG WM1437RFD (Snr 611KWP00130) #377840
    rocker
    Participant

    Re: LG WM1437RFD (Snr 611KWP00130)

    Anyone please..connect cant help !!

    July 8, 2012 at 8:23 am in reply to: Indesit IWDC6143UK #376957
    rocker
    Participant

    Re: Indesit IWDC6143UK

    Did you check the ohms reading of the NTC’s are in range..I dont know the autual values but someone on this site will.

    July 6, 2012 at 2:54 pm in reply to: Bosch SRS4302GB/05 (D/W) #377792
    rocker
    Participant

    Re: Bosch SRS4302GB/05 (D/W)

    Thanks Martin, glad you told me this info.John

  • Author
    Posts
Viewing 15 posts - 451 through 465 (of 1,132 total)
1 2 3 … 30 31 32 … 74 75 76