[RocketMan]

Re: Masterpart Again.

Ebay shop http://stores.ebay.co.uk/Spares4Appliances?_rdc=1

They’ve also got an Amazon account as well.
You’ve got move with the times but you’re correct,sometimes it’s cheaper to buy individual items from ebay. Occasionally Ebay items are much cheaper but not everything is on the Ebay shop. It doesn’t explain why stock levels vary from Ebay to trade site. I regularly check the price on Ebay shop before purchasing from Trade site.

[RocketMan]

Re: Tips, Tricks & Shortcuts

Panasonic Washing Machine – Emergency Door Opening Procedure

Not in user manuals but will be useful as they don’t open when the power fails or the PCB takes a hike.

I can’t get the image to show but follow the link.

Also, Pansonic washing machine manuals here:
ftp://213.147.98.168/Servisne_upute/Pan … ce_rublja/

[RocketMan]

Re: rangemaster 110 simmersat

No – no link wire – who mentioned one?

PM me and I’ll send you a piccie. You’re not convinced are you? Note: Three different versions of this so yours may not be the same. PM serial no as well..

[RocketMan]

Re: rangemaster 110 simmersat

bradley wrote:there four wires to go on 4, but only one tag help please

It’s self explantory. PM me if you want some piccies.

Line to P1 (single wire)
Red/Yellow (element) – 2 (two wires)
Main neutral – P2 (two wires)
The other remaining neutral 4 (single wire)

[RocketMan]

Re: rangemaster 110 / 5344

To close this thread and for future searches:

Regulator part no up to serial 100999=P029546. Replacement is an EGO 50.57071.010.

[RocketMan]

Re: Leisure rangemaster 110

For future searches, this one sorted with help from Rangemaster tech support:

Line P1
Red+Yellow 2
Main neutral (2 wires) P2
Remaining single neutral 4

This is for an early version, serial <100999 but may be ok for later versions. Hope this helps someone in the future 🙂

[RocketMan]

Re: rangemaster 110 simmersat

I’ve got the same problem.

I’ve just spoken to RM Tech help.

Line to P1
Red/Yellow (element) – 2
Main neutral – P2
The other remaining neutral 4

HTH

I’ll let you know how I get on 🙂

[RocketMan]

Re: Leisure rangemaster 110

RocketMan wrote:I know this is an old thread but the same problem. Old 40er102c1 to Ego 50 57071 010. It’s not here, I’ve looked. Anyone got the conversion sheet please? Thanks in advance..

[RocketMan]

Re: Leisure rangemaster 110

I know this is an old thread but the same problem. Old 40er102c1 to Ego 50 57071 010. It’s not here, I’ve looked. Thanks in advance..

[RocketMan]

Re: rangemaster 110 / 5344

Anyone help please??

[RocketMan]

Re: rangemaster 110 / 5344

Kirk wrote:2 part numbers depending on serial number

1. A098256 up to 100999

2. A027419 101000

Kirk

Found the grill regulator I need 😀 However I also need 1st Regulator on LHS which is for front LHS hob plate, small one. Being given lots of different part number.

RM 110/5344 Serial 006061. If someone could put me out of my mysery. (not litterally of course)..Thanks

[RocketMan]

Re: WMD940P (UK) R – door seal

Found time to sort the picture. As you can see there’s a noticeable difference in the lip width. The newer one also has these ridges that also push the lip out further.

Don’t really know what to try next? I’ve double checked the seal was fitted correctly. I’ve checked the drum to make sure it’s still circular and not slightly out of shape. More difficult to tell,but the tub port hole seems fine as well.
The label on the bag the seal came in had a Hotpoint label C0011416 but then had a suppliers label of C00262267.

Confused, I am, hacked off and spent too much time on this already as well as being way out of pocket 😡

[RocketMan]

Re: WMD940P (UK) R – door seal

Thanks for the replies guys.

C00144134 does not fit as the diameter is too large. End of story.

Back to C00262267/C0011416 looks the closest. However, on further inspection, there are additional ridges which push the seal out making the lip thicker. The original is smooth and thinnner. I’m pushed for time at this moment but will upload a picture later.

I remember having similar problems with a door for a Hotp machine that had “C” in it’s model no. I think someone said this was made in China. Had two different doors direct from Hotpoint-even they didn’t quite get it right first time. What hope have we?

[RocketMan]

Re: WMD940P (UK) R – door seal

I’ve got no choice but to try C00144134. A tub change or incorrect Partfinder, I don’t know. If I get chance I’ll get to it today.

Thanks for the replies.

[RocketMan]

Re: WMD940P (UK) R – door seal

Thanks Jim. That’s two sources said the same thing. However, it’s definately doesn’t fit and the inner lip is different. Time for a cuppa and I’ll look at it again first thing. Thanks again.

[Author]

Posts