roy1

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 98 total)
1 2 3 4 5 6 7
  • Author
    Posts
  • January 27, 2012 at 12:36 pm in reply to: WML error codes #367919
    roy1
    Participant

    Re: WML error codes

    The WML520 OR WML540 have wash,rinse, spin, drain, end & door lock.
    Roy

    January 26, 2012 at 7:56 pm in reply to: WML error codes #367915
    roy1
    Participant

    Re: WML error codes

    Trouble is that only shows 5 leds, with door lock number 1 & wash led number 5 led when the wash led is actually number 6
    Roy

    January 4, 2012 at 8:33 pm in reply to: Hotpoint WMA 57 fill valve pulsing #366512
    roy1
    Participant

    Re: Hotpoint WMA 57 fill valve pulsing

    I think the post said it was the door interlock.
    Roy.

    December 21, 2011 at 8:11 pm in reply to: VTDOOP drum #365476
    roy1
    Participant

    Re: VTDOOP drum

    Nice

    December 19, 2011 at 8:01 pm in reply to: VTDOOP drum #365474
    roy1
    Participant

    Re: VTDOOP drum

    Yes both sets were genuine parts
    Roy.

    December 7, 2011 at 8:32 pm in reply to: WDL 540 Hotpoint washer dryer #329286
    roy1
    Participant

    Re: WDL 540 Hotpoint washer dryer

    Hi does anyone know what the fault is ive got a wdl540 doing the same with the four option & start lights flashing,But no vertical error lights,
    Roy.

    November 3, 2011 at 7:04 pm in reply to: Hotpoint Wf000 – All lights flashing #362756
    roy1
    Participant

    Re: Hotpoint Wf000 – All lights flashing

    Are the lights flashing at full or half power ,If its half power the problem is the 400v 22uf capacitor on the power supply they go out of range if you test them on an esr meter.
    Roy

    November 3, 2011 at 12:25 pm in reply to: Bosch WAA24169GB/01 All lights flashing #362712
    roy1
    Participant

    Re: Bosch WAA24169GB/01 All lights flashing

    Thanks for the reply Mike i was thinking board or pressure switch.

    November 3, 2011 at 12:22 pm in reply to: BHWD129 Lights flash #362840
    roy1
    Participant

    Re: BHWD129 Lights flash

    Could be the dryer Nct.

    August 15, 2011 at 7:10 pm in reply to: Hotpoint HVF344UK #356256
    roy1
    Participant

    Re: Hotpoint HVF344UK

    The dst 50265479001 is sold as a pair it runs in better,and costs only a £1 more.

    March 29, 2011 at 4:43 pm in reply to: Hotpoint SY36 oven #348096
    roy1
    Participant

    Re: Hotpoint SY36 oven

    Is that oven one with the knobs that look like they have two pointers,
    i have had customers set the oven to the wrong side of the knob.

    March 28, 2011 at 8:31 pm in reply to: Hpt WDF740 f01 error #345684
    roy1
    Participant

    Re: Hpt WDF740 f01 error

    Fitted board from EMW, been working fine thanks for your help.
    Roy

    February 26, 2011 at 10:52 am in reply to: Hpt WDF740 f01 error #345683
    roy1
    Participant

    Re: Hpt WDF740 f01 error

    Thanks for the help, that was my next step its just odd that it spins ok
    and will wash for 4 mins before error.
    The only thing i could think of was that the error was at the change from
    normal wash to gentle action for heating.

    February 3, 2011 at 8:06 pm in reply to: hotpoint tcl770p ser:806040056 #343497
    roy1
    Participant

    Re: hotpoint tcl770p ser:806040056

    Check the door switch & plug on the board,had one a few weeks ago the board was green from moisture build up inside.

    December 3, 2009 at 7:38 pm in reply to: Hotpoint FDL570 #305593
    roy1
    Participant

    Re: Hotpoint FDL570

    Do you need a new module or can you re-program the old board.

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 98 total)
1 2 3 4 5 6 7