Forum Replies Created
-
AuthorPosts
-
Seamy
ParticipantRe: BEKO TD162 W Dryer Drun seized broken belt
They are slide bearings, they may need replacing if damaged. Front felt normally needs replaced if repetitive belt breakages happen. Not the easiest of jobs, perhaps you may need to get an engineer to look at it as it could prove costly breaking belts if it’s not done properly.
February 19, 2011 at 8:08 am in reply to: Door seal retaining ring refitting on AEG Lavamat W 1230 #344981Seamy
ParticipantRe: Door seal retaining ring refitting on AEG Lavamat W 1230
If it’s a new seal you’ve put on it may not tighten up exactly as the previous one was. Make sure seal is seated correctly onto front of appliance, washing up liquid smeared on it helps it slip on better, once clip is tight it shouldn’t come off, after a few uses you may be able to tighten it more.
Seamy
ParticipantRe: Zanussi DE6744 cleaning
http://www.finish.co.uk.
Use dishwasher cleaner on it.Seamy
ParticipantRe: Best make of van for the job (all rounder)
Stuck with the transit for now, old one off to be recycled.
Seamy
ParticipantRe: Freezer is driving me round the bend
Most noisy newly installed fridges or freezers which i’ve had to attend due to loud noise, i’ve found to still have the polystyrene packaging wedged above the compressor motor, which should be removed.
Seamy
ParticipantRe: Hotpoint?Indesit fill valves??
Got & fitted one last week.
February 10, 2011 at 9:16 am in reply to: Miele model G663 SC V-I : loud bangs and acrid smell #344128Seamy
ParticipantRe: Miele model G663 SC V-I : loud bangs and acrid smell
Sounds like a motor problem, likely a leak into base also.
Seamy
ParticipantRe: Gary Moore RIP
Contrary to headlines in The Sun, he didn’t die from a drinking binge, choking on his own vomit on the floor in his underpants, he actually had a heart attack while asleep in bed.
Thin Lizzy have reformed with Ricky Warwick on vocals & are actually playing Belfast in next few days, they had asked Gary to join them onstage, he refused the offer, now it’ll be dedicated to his memory.Seamy
ParticipantSeamy
ParticipantRe: zanussi zwd147s tub seal seems an odd one
:tup:
Seamy
ParticipantRe: zanussi zwd147s tub seal seems an odd one
Front pump at filter is drain. Cables to drain pump connect to PCB connections J3 2&6, recirculation pump connects to J11 1&2
Seamy
ParticipantSeamy
ParticipantRe: Zanussi FJS1225W P/NO 914512720/00Hi
Sounds like a dodgy interlock, cable, connections or p.c.b
Seamy
ParticipantRe: zanussi zwd147s tub seal seems an odd one
3 weeks now we’re waiting on ya to finish it 😆
Seamy
ParticipantRe: AEG Lavamat 610 Interlock
Its quite an old one, 20 years i’d say.
AEG Door Interlock 8996452012314 (5031680575842)think this is it —
-
AuthorPosts
