[Seamy]

Re: Best washing for this customer

Wheres the info on ISE2?
I’ve read about 5 & 10 buffin on 2.

[Seamy]

Re: hotpoint/indesit software (wash doctor)?

Understood :rolls:

[Seamy]

Re: hotpoint/indesit software (wash doctor)?

Baron how big is the Program, can it be put on CD rom or DVD?
Or is it available to share online anywhere?

Thanks

[Seamy]

Re: HPT DWF34 D/W mains filter

I’d charge him for call out – finding the fault & estimating for repair, if he declined to go ahead with the repair fine.
All appliances will run without a mains suppressor but it will interfere with TV & Radio reception if theres none fitted.

[Seamy]

Re: Bosch WFT2800

White Smoke, new pope in there? 😆

[Seamy]

Re: Current Callout/Repair Charges for Manufacturers & B

MIELE Call-out
The call-out price which Includes 1 hour Labour (all major appliances) and VAT is

Domestic £99 (inc vat) – Payment will be reduced to £94 (inc vat) if made as soon as repair is completed.
Domestic Estimate Call £67.13 (inc vat) – Payment will be reduced to £62.13 (inc vat) if made as soon as engineer has completed inspection

[Seamy]

Re: New on the home page

Is it the subtlety of:– :rolls:

The comments are property of their posters, all the rest © 2003-2007 by UK Whitegoods Limited

[Seamy]

Re: MIELE – g638 filling when on ‘stop’ and draining

If there is supply at valves , change electronic. If there is water coming in while suply is off you possibly need new water-proof valve.
These have 2 valves in sequence so if on fails second one should stop water, what sometimes happens is that grit gets trapped in valve & doesn’t shut off completetly.

[Seamy]

Re: Neff hob regulator, alternative

How do you mean , colour of rating plate of hob or selector switch?

I can’t see any info on website about it as i’m not registered.

Thanks

[Seamy]

Re: Miele Wash M/c W842 Fault Code Flashing `Rinses`

Basically its the electronic saying that its sent power to motor but did not receieve a signal back from tacho to indicate movement.

I’ve had to replace motors, motor modules, brushes & electronics with this fault

Most likely fault is that motor wasn’t able to turn drum & has possibly damaged it, take it off & look for damage to armature, or carbon brushes

[Seamy]

Re: unworked returned appliances

I can only presume that they’ve been stored or transported incorrectly, possibly lying down?

[Seamy]

Re: Bearings on an AEG washing machine

Has it the crosspiece at back of stainless steel tub or is it plastic Zanussi type tub split in the middle ?

[Seamy]

Re: Hpt WF860 heater connectionc

I presume it doesn’t matter what way live & neutral go , as its an element?

[Seamy]

Re: Thank’s Indesit

Are they worth repairing?
When you add up the cost of parts + labour required most of them are BER

[Seamy]

Re: TCR2 noisy when it heats up

Cheers. it is a TVR2 & pray tell how much will this drum cost?

[Author]

Posts