Forum Replies Created
-
Posts
-
Re: Liebherr fridge freezer CUNESF 3903-20 freezer alarm
Hi. Looking this up it seems to be a frost free fridge freezer. I would recommend that you defrost the machine again but leave it off for 24 hours.
Re: Start/pause button beko tumble dryer
remove the lid then remove the start button. use some polish to spray the whole where the button sits. should do the trick.
Re: siememes iq300 SN26M253GB/43
Hi. there is a side water chamber panel and a pipe underneath that blocks up on theses. If you remove the left hand panel of the machine and the front bottom plinth you should be able to find the problem. be careful.
Re: New Front Panels
Hi. I can get a panel. Depends on what one you want but you can get them. Not many people will waste the time to list them on ebay as they only want to list the easy things like elements / pumps ect as they go wrong more and not may people want to spend money on a scratch or a dent.
Re: Bush Range Cooker ModelG90SWE
Hi. Dont know if this helps in any way?
PM me if you need more help.
Re: Lg F1447 TD5 ? Motor fault
Hi.
its could be the sensor if there is one on this model but more than likely its the pcb. (bottom front right of the machine) If this is a direct drive you should be covered by LG’s 10 Year Guarantee.Re: No water from lower arm
Hi.
Yes there is a valve under the bottom of the machine. you should be able to tip it back and remove the bottom panel to get to it. you may be lucky and something has blocked its movement.
Any problems, take some photos and PM me,Re: Maytag MWA 09149 WH/1 – error F12
HI. F12 is a drain Error code. So pull out the filter and then look in the back and see if you can feel the pump blade. you should be able to flick it round with your finger. if it does not move something is stuck in it.
If its not stuck you could have coins in the hose or the pumps had it.
there is a bad video on youtube if you search Maytag F12
Re: Indesit D16 not starting
Hi, it could be the door lock micro switch that has a fault.
Do you have any flashing lights or codes?The machine would normally start off with a drain pump noise before it fills so if you don’t hear this noise I would guess door lock
Re: Samsung RBFERNDBC – should it be this noisy?
simple answer to this is its the fan making a noise or the compressor can vibrate on these.
If you open the freezer door you should find that the fan will stop so if the noise stops it the fan.
If the noise continues its more thank likely the clips holding the compressor down.
you may also find a fan near the compressor. if the vent is blocked with fluff again may find that its the cooling fan if it has one,
Re: Brands
Brands.
Well if you buy cheap powder from the supermarkets they tend to block up your machine and not give very good results
I would always recommend a decent liquid for coloureds and a decent powder for whites. If you did not know that already the powders have light activated bleach in so when you hang your washing out on the line you should notice it becomes more white in colour than if you tumble (as long as its a sunny day).
Re: tricity bendix aw 1560 w making clicking noise
Hi.
does the machine fill with water? If it dose then it is the motor/carbons.
if the machine does not fill with water it could be a valve.Re: Hotpoint FFA71 Fridge Freezer. Random Fault!
Hi. I always advise my customers to turn off the fridge freezer for 24 hours to make sure it has a full defrost then turn on and try again. It could also be system fault.
