Forum Replies Created
-
Posts
-
Re: Candy Washing Machine switching on and off
It may be a stupid question but is the power plug hanging out the wall behind the machine. I have come across this a few times over the years.
Re: gas ignition igniter 1.5 votls or 12 volts. anyone know
Lol. I will always remember the time i cut straight through the cable on a Henry when I mistakenly unplugged something else in the workshop. Needles to say my pliers could never be used again.
Re: Whirlpool 2 door fridge /freezer
Not sure on this model but if its like the latest lg machines thw whole thing os molded into the door. Havd to fit a new door what was crazy. These things are ment to be earth friendly. Sometimes you can access from inside if your lucky
Re: Hoover dryer E08.
Do you still need help with this? if so send me a pm and i will see what i can do
Re: Setting maximum power on Hotpoint (Indesit) induction ho
Is this a programming or debug socket ?
Yes this is what hotpoint connects there computer to.
It sounds like its a new machine to me? If so give them a quick ring and they will help you, If its out of guarantee there are a few people that wont touch induction hobs so you may have to ring around but I only say this as it sounds like you have a fault and advise you to repair yourself but that’s up to you
Re: No Power to Zanussi ZDS2010
HI. the outage probably blown the suppressor on the main in feed.
Try to get in and have a look at that. test with a meter if you have oneRe: Dishwasher intermittent heating fault
YEs its a PCB problem. I have an aeg that does the same. you will find your dishwasher is made by AEG ( Electrolux)
If I turn mine off just for a few mins it will heat but if any of my kids open the door in mid wash it stops heating. This is why i only put mine on late at night and though i’m in the trade the PCB for mine is still £150 ish so a simple turn off and on is what we doRe: Hoover DYC 8913BX-S not heating
Hi.
These machines show up a fault even with a low leakage on the element. Most I have looked at with E08 have needed a new element.
I would guess you only have a box standard meter for checking over your machine that may not pick up the problem.Re: Bosch Exxcel SG45E02GB/45 Control Module Fault?
It sounds like it to me. I have an aeg dw that will only heat if you turn off the mains for 60 seconds befor I select a new wash program. open the door in mid was and I lose the heat, Relay problem on the main PCB.
Re: ISE T25wc dryer fan
Don’t know if this is any help to you
https://drive.google.com/folder/d/0BzQw … I2S1k/editRe: JLDWS1204 (D/W) 91191632001
I can get exploded diagram for parts only sorry
added the product code to the post for youtry asking for someone that has electrolux access.
