Forum Replies Created
-
AuthorPosts
-
Simon46
ParticipantRe: Neff U1422n0gb/03 main oven switch pushed in
The mounting bracket that 00425173 clips onto is not showing as a spare part. I might try supergluing it into front panel and then siliconing it to the panel then clipping in the heavy selector switch and thermostat to it.
Many thanks SimonSimon46
ParticipantRe: Zanussi (vented dryer ) 916093366/02
Wall vent blocked?
Simon46
ParticipantRe: Beko DWD5411 dishwasher hoses.
Yes see a few. A blob of debor on nozzle keeps it on. Hose softens with heat maybe?
August 29, 2015 at 1:43 pm in reply to: Beko CDA648FS/1 Frost Free Fridge Freezer-Fridge is Frozen. #409786Simon46
ParticipantRe: Beko CDA648FS/1 Frost Free Fridge Freezer-Fridge is Froz
The black plastic sleeve is to stop ingress of moisture which is the reason why your original thermistor failed.
Simon46
ParticipantRe: Oven lamp cover Bosch HBN 43M5.OB
And with safety glasses on!The glass can splinter and travel far.
Regards SimonSimon46
ParticipantRe: Bosch e15 water error sms69L22gb/44
Does the drain hose connect to a spigot or does it go into a standpipe? If a spigot there may be a blanking cap or blockage in it
Regards
SimonSimon46
ParticipantRe: BEKO BC73F FRIDGE OVER FREEZING
Just done a cda539f unplug sensor. Didnt come on in the 45 mins I waited so left job but customer reports it is running now.
S.
Simon46
ParticipantRe: Amana XRSS287BB freezer evaporator fan motor
Fitted the motor measures 190 ohms. 0ld motor is 2 ohms. 230 volts at spade terminals but drops to 3 when connected. Anyone ever repaired a12002331 board for this?
Simon46
ParticipantRe: Amana XRSS287BB freezer evaporator fan motor
Well its been dispatched
Simon46
ParticipantRe: Amana XRSS287BB freezer evaporator fan motor
Well ordered it off http://www.4Amana.Co.UK for next day delivery at a cost of £85.98. Yet connect distribution show £32.50 plus but out of stock. The same company!
Simon46
ParticipantRe: Zanussi ZBB7266
Ive just declined one. Unworkable.
S.Simon46
ParticipantRe: CDA WC130 (Whirlpool) Dishwasher strange fault.
I remember I spent ages on it thinking a F4 not draining fault. When you said the wash pump keeps stopping and starting I remembered it. Not the same whirlpool error codes on this one.
Simon46
ParticipantRe: CDA WC130 (Whirlpool) Dishwasher strange fault.
I had one with blocked spray arms/filter do this. Cant remember model no though.
Simon46
ParticipantRe: Smelly Washing Machine
Yes water doesnt flow uphill. It stays in the pipe. Also make sure your drain hose is hooked into the standpipe so the end is not shoved all the way into the water in the trap.
Simon46
ParticipantRe: Baumatic b180 grill problem
My b180ss runs off the thermostat. Have you tried a higher temp?
Regards Simon -
AuthorPosts
