Forum Replies Created
-
Posts
-
Re: SMEG COOKER MOD SUK91MFX
i would start by checking the temp inside ovenon 200 and c if the real reading is any higher have had stats give false readings befor smartin
Re: low cold water pressure
they used to put flow control washers in the valves behind the removeable filters, i used to take them out and that improved the flow but customer must know incase they take machine elswhere with higher pressure smartin
Re: Hotpoint BFI620 intergrated dishwasher heater fault?
is it a chinese d/w if it is some have cut out stat underneath on the left hand side rear or if not could be group of stats underneath between sump and salt chamber hope this helps smartin
Re: Samsung RS20CCMS freezer frost
iv had the same fault as you pete 1st machine module was fitted but failed again after a year so i went there and fitted another 1 and that didnt make the slightest bit of difference machine was written off, now i went to a call yesterday same prob not switching on again but am reluctant too order module as this 1 is out of guarantee any one else had this problem and cured it ?
Re: Servis M6135
have had the same problem with this machine after picking up someone elses recall, its had 2 modules ,display board,and door switch. i reset it after every try but still made no difference this 1 had been ongoing since nov 06,have now passed it back to insurance company to write off, which i dont like doing. it would be nice to what is causing it if only for future reference.
Re: lg td370040e tumble dryer
hi monkey there is a conversion for these and from memory its a new filter but could be wrong , if you have got a connect account check on the lg site hope this helps smartin
Re: Bosch wfl120gb/12
i know its a long shot but iv had a couple of dishwashers with faults the same as this and in both cases the machine was siphoning the water away its worth checking if you havnt already 😀
Re: siemens speakin french help !
thanks tony and martin ,didnt have the manual as was a recon 4 me done by me, 21 years in this trade and never bought a new machine lol (tight git or economical) perhaps we could start a thread on this , who in the trade has never bought a new machine lol, got it sorted though just for future reference with door open turn dial to 30 prog to right of off position then press menu and change buttons together and voila it speaks english again thanks again smartin
Re: bosch wfr2866gb/01 error 17 ?
thanks for that gegsy helped a great deal 🙂 dont spose ya could pm us a list of fault codes if ya have em many thanks smartin
Re: bosch wfr2866gb/01 error 17 ?
cheers for that martin worth a try, but if anyone knows what error 17 as well ty 🙂
Re: airlux dw lv22a(rebadged neff fully int slim)
lol did say what it was in subject box but didnt want to write to much in there, its a fully integrated slimline(buttons on top) module is in black box has several buttons on top but according to which machine it is only 3 or 4 are options, to programme it to the machine you have to press all 4 buttons while switching machine the machine on which is a bit of an a*se when its a 3 button machine not to mention dangerous, all that said it is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} possitively definately a bosch/neff made machine, module is dead hope this clarifies things a bit many thanks smartin
