[smeghead]

Re: Bosch F21 again !! WAE28467UK/14

never stop learning do we!
would be nice to know the actual reason it’s hit & miss- over to you Bosch engineers.

[smeghead]

Re: Bosch F21 again !! WAE28467UK/14

I guess I’ll scrub me fingers first next time, before resetting.
Clive

[smeghead]

Re: Bosch F21 again !! WAE28467UK/14

update
customer rung today & said he ‘d managed to reset the machine after 3 goes.
I think I’ve lost my touch!!!

[smeghead]

Re: Bosch F21 again !! WAE28467UK/14

maybe it’s just luck whether u hit button at the right time,or when you lift ya finger off the spin button. you lucky fella!!
didn’t know the door ( open or shut )was connected with reset.

[smeghead]

Re: Hoover DYN9164DPG/L1-80 loom

na, no error code, just filled then no drum action.
Clive

[smeghead]

Re: Hoover DYN9164DPG/L1-80 loom

I did think of doing this Steve, but the motor terminals run pretty close together & i didn’t wanna risk tags touching.
Have quoted customer for new loom now.

[smeghead]

Re: Thomson Local gets thinner

Totally agree, pulled out of Y.Pages 2 year ago & yell last year.
Website /internet definitely the way to go .
Have to keep up with the latest trends.
Even get calls through Facebook – not that I’m on that!
Clive.

[smeghead]

Re: Bosch SMS50 E06GB/07 heat pump

Brilliant, thanks Martin, just the job.

Clive.

[smeghead]

Re: Bosch WAS 28460GB/04 Dead

Ok, thanks- will go back & give it a try.
Not sure what the 3D sensor is though!!

[smeghead]

Re: Belling Cooker Format 636

had one of these with a similar fault.
turned out to be a duff lamp holder, the bulb had blown sometime ago, but they left it in – eventually the terminal inside arced out on random occasions.
Clive.

[smeghead]

Re: Bosch WFX2868GB/20 stops/flashes

fair comment Martin, but customer says it’s always 15 mins from end, if it’s a ribbon cable , it would occur at any time during cycle surely.
anyway thanks for your input!

[smeghead]

Re: hoover HED6612/1-80 dishwasher.

I think most dishwashers engage the r.aid solenoid for about 15/20 seconds.
I would change the box, sounds like the seal inside the has worn or bunged up.
Clive

[smeghead]

Re: Neff s54t09x1gb/21 not heating

Martin wrote:If you remove the 2 torx screws that attach top spray pipe to sump you can see the cam. If that is all clear then chances are the impeller is clogged with detritus. I use a torch and dentist mirror to peek inside the circl pump from the sump. Then use a hooked wire to poke out any rubbish from the impellor.

Martin , that’s exactly how I do it- great minds……
quite a common fault down our way, they never rinse the bleeding plates, nice little earner.
Clive

[smeghead]

Re: Neff s54t09x1gb/21 not heating

sounds like a fouled impeller in the wash pump.
worth a look,
Clive

[smeghead]

Re: Hotpoint Aqualtis AQ113D

Ok, thanks for that
I’ll send her to hotpoint as its 4 yrs old.
Clive

[Author]

Posts