Forum Replies Created
-
AuthorPosts
-
smeghead
ParticipantRe: Hoover washer ASM160UK S/N.31000584 Door lock proble
Thanks Tim, looks different from original, but at least its not cable operated, will give it a go.
Cheers.smeghead
ParticipantRe: Beko CTD MODEL.DCU7230
ok
didn’t check ntc for earth fault to be honest, thanks for feedback , will go & double check ntc.
cheers.smeghead
ParticipantRe: Painful to watch
as one of the comments reads, engineer does it in about 15 mins & £40.00.
Thats about right , for a bra wire- what a tight ar*eLike the way he says its far too expensive to repair!!
Clive.
smeghead
ParticipantRe: Hotpoint WMUD 10637 washing machine
iadom wrote:Initial fill through one valve to lift the eco ball, if you fill it past the lowest level it will then fill through the other valve.
Replaced valve, still no fill, reset p.switch again just in case, no fill!! 👿
Told to try Hotpoint ( 5 yr ) – needless to say shes never buying a Hotpoint again. Who can blame her.
Thanks for advice all.Clive
smeghead
ParticipantRe: Hotpoint WMUD 10637 washing machine
OK, I’ll pop back & plug a new valve in an see if it works, if the punter lets me- she’s a regular so should be alright.
Worth a shot , if no good , I’ll send her back to hotpoint – Shame. Hotpoint really make life difficult for us independents these days( I guess thats the point ) – bring back the WM range or earlier.smeghead
ParticipantRe: Hotpoint WMUD 10637 washing machine
I got it to fill during rinse cycle, after first manually filling thro drum with couple litres of water, seem to work.
I didnt check valves otherwise, as they appeared to work!
Maybe go back & couple up a valve and see what happens
Thanks.smeghead
ParticipantRe: Smeg D/W 1+5 steady?
he will be back!!
smeghead
ParticipantRe: Smeg D/W 1+5 steady?
never heard of it, they must mean E1 error, ( 1. flashing , 5. Constant ) leak /aquastop
Clive
smeghead
ParticipantRe: Banking
Been with Santander for several years- free banking , then went Ltd this year, had to open new account under new name , still only charge £7.50 a month though!
Clive
smeghead
ParticipantRe: Masterpart Again.
yep , me too haven’t used for several months for same reason, parts show in stock when there not!
Were always competitive on price, but poor website lets them down.
Its Qualtex for me .
Clive.smeghead
ParticipantRe: Beko WM 74155 LW
The brushes & comm looked good , so maybe overloading then as its in a council run home sitting next to 2 Miele commercial machines- council cutbacks then!
Cheers for your helpClive.
smeghead
ParticipantRe: Beko WM 74155 LW
ok, thanks for that, will order both & keep everything crossed
Clivesmeghead
ParticipantRe: hotpoint dishwasher SDL510P leak
New salt pot cured it, they can put the marigolds away now!
Clivesmeghead
ParticipantRe: hotpoint dishwasher SDL510P leak
did ask about salt, but of course they always use dw salt!! , anyway gonna change salt pot later this week,
will keep you posted. thanks.
clivesmeghead
ParticipantRe: Checkatrade gaining ground
Have been a member since july 2012 , no complaints here !!
got great feedback, busy all the time.
Will ditch YP next year because of it.
Clive. -
AuthorPosts
