[Specialist01269]

Re: Whirlpool AWM8163 – F12 fault code

Hi Twick: Only reference I can find for the F12 error also says faulty element, looks like your going to need to get down & dirty with the machine mate 🙂

[Specialist01269]

Re: Bosch WVT1260GB Drum Not Rotating

Your more than welcome, we’re here to help. Please come back & let us know how you get on.

[Specialist01269]

Re: Hotpoint tdc 60

Nicely done, just goes to prove that if you don’t try you don’t get.

[Specialist01269]

Re: Candy CN150T drum does not rotate

Hi: Does the drum turn easily by hand ?

[Specialist01269]

Re: Siemens HB77L55GB Quantum Speed combination microwave fa

Hi: I’m sorry but we don’t provide any information on repairing Microwaves, your safest bet would be to call a local engineer to look at it for you.

[Specialist01269]

Re: Hotpoint Creda SPC61 Main Oven …

Glad we could be of service 🙂 If you need the part for your oven, check out the UK whitegoods store. Most parts are available there at competitive prices.

[Specialist01269]

Re: Indesit widl102 problem

No problem, your more than welcome.

[Specialist01269]

Re: Smeg Cucina SE375 single oven takes ages to pre-heat.

Hi: Without actually being able to test the oven it’s difficult to say, I would have thought the top element should work along with the bottom element when in oven mode so you get uniform heating. It’s possible that you have a control faulty but without testing the unit it’s impossible to say for sure. It might be an idea for you to contact a local engineer to check it out for you, if you click on the link above your 1st post you should be able to find an approved engineer in your area.

[Specialist01269]

Re: Bosch WVT1260GB Drum Not Rotating

Hi Yucca: What Martin says is right, with Bosch especially the only safe way to go is with the Genuine part. Just think about after market brushes for a moment & why they’re so much cheaper than the genuine ? I use Pattern parts for many repairs at customers request, but never motor brushes. I’ve had them overheat, chip & arc for example & this can cause further problems.

[Specialist01269]

Re: Ignis ADL 348

Hi Garry: I believe on this 1 you get at the element by removing the back panel.

[Specialist01269]

Re: whirlpool 2000 model G2P61F/SS oven

No problem, your welcome. Please let me know what you find.

Andy

[Specialist01269]

Re: whirlpool 2000 model G2P61F/SS oven

Ok: 1 thing you can do is check in the cupboard either side of the oven to check if the oven is connected via a plug or fused connection unit. If it is then check the fuse either by replacement or with a Multimeter to see if it’s good, if you don’t find the problem then i’m afraid it’s time for an Engineer. If you do need an engineer, take a look at the page above your 1st post & click on the link. You should be able to find an approved engineer in your area.

[Specialist01269]

Re: whirlpool 2000 model G2P61F/SS oven

Is there a light inside the oven ?

[Specialist01269]

Re: whirlpool 2000 model G2P61F/SS oven

If the hob is working then in theory you have power to the oven as well, if there’s a Digital display or an oven light then if you’ve got power to the oven they should be lit.
You may want to consider calling a local engineer to look at it for you.

[Specialist01269]

Re: whirlpool 2000 model G2P61F/SS oven

Hi: Do you know if there’s actually power going to the oven ?

[Author]

Posts