[Specialist01269]

Re: CATA / B & Q Combi Microwave MC25SS

Hi: Could be 1 of several problems, but Microwaves have lethal voltages inside even when turned off & unplugged. 😯 😯
Please leave the repair to a qualified Engineer with the proper equipment & safety training.

Andy

[Specialist01269]

Re: Any suppliers of raw machines in Wales?

Hi mate: No there’s no suppliers left in Wales anymore & yep you got it right from what i can find out.

Andy.

[Specialist01269]

Re: Diplomat ADP 8132

Hi: Sorry I didn’t get back to you but i’ve been away from the site for a few days, while I applaud your repairing your machine. I have to say that this can by no means be classed as safe, you should have used a 13amp Water sealed connector for Safety. Glad to see that you made sure the Earth was re-connected, what you refer to as a Capacitor at the input is in fact an interference filter.

All the best: Andy. 8)

[Specialist01269]

Re: Lincat commercial range cookers.

Can’t argue with that Spimps, excellent quality kit. Another upside is that they are usualy not that to hard to fix if they do go wrong. 8)

[Specialist01269]

Re: newbee

Hi Mate: Welcome to the Madhouse 😆
Fault code sitcky just above your post, has masses of info.
Also the UKWG Fault code guide is normaly available from shop@ & will earn it’s money time & again.

Andy. 8)

[Specialist01269]

Re: Zan DW – DES959

Hm: Now that’s what you call a Dentists dream 🙂 Bet he gets through the crunchy bits 😆

[Specialist01269]

Re: Zan DW – DES959

Hiya: AL4 indicates Anti Flood system activated or faulty.

[Specialist01269]

Re: Test Gear & Safety testing

Please Peeps: Help me out here, I am Andy’s (specialist 01269) Nephew / Apprentice / Gofer & asked Andy about this, he told me to look it up on the internet as it would help me learn how to find information but I couldn’t find the info so thought I would ask you guys.

Thanks: Mark 😕

[Specialist01269]

Re: Diplomat ADP 8132

Thanks gandh1.

[Specialist01269]

Re: LG Tumble Dryer TD-C70045e

Just a thought, did you change the cap from the duff motor onto the new one? or did you fit a new cap with the motor.

[Specialist01269]

Re: BEKO WMA510W – making loud noises

Hi: It is perfectly possible that you drum bearings are gone, if you remove the drive belt & turn the drum by hand you should be able to hear a noisy bearing, also if you gently rock the drum up & down you may well feel movement.
Changing the bearings may be possible for a DIYer with the right tools, but be warned it can be a pain & very messy.

If you contact the UKWG shop they may well be able to source the bearing for you at a good price.
If you don’t feel confident tackling the job, please see repairs@ for an Engineer local to you.

PLEASE REMEMBER POWER OFF & PLUG OUT IF OPENING THE MACHINE.

[Specialist01269]

Re: hotpoint tdc60 drum wont turn

Could be 1 of a number of things: Motor, Electronics, Drive Belt etc.

If you are not confident in your ability to carry out repairs please see the repairs@ link for an Engineer local to you.
If you are going to do it yourself any parts you need can be obtained from the shop@ link

PLEASE REMEMBER POWER OFF & PLUG OUT BEFORE OPENING.

[Specialist01269]

Re: Old Machine’s

Yep: That was when things were made for quality & not down to a price, you won’t see most of todays stuff lasting 6 years let alone 60 🙁 they call what we have today progress, I know what I call it but the Mods would probably give me an ear bashing if I wrote that 😆

Andy.

[Specialist01269]

Re: Diplomat ADP 8132

OK let me know tomorrow & we will go from there, I dont think the blocks are still available but we can use a universal connector.
Just 2 things: Are you confident in doing DIY Electrical repairs if your told how? & Have you got a Multimeter?

Andy.

[Specialist01269]

Re: Indesit WM12X very noisy on spin

Mine does that too, but will never admit it 😆 As you said certainly looks like the bearing is shot, good luck with the repair.

Andy.

[Author]

Posts