Forum Replies Created
-
Posts
-
Re: Hotpoint RLA34G access to thermostat
If you mean the whole top of the appliance it does not come off.
Re: Indesit Smart Card
There is a Tech Buliten out about AL09 errors I cant remember the serial numbers that it relates to but the way around the problem is this.
Ensure the dishwasher is switched off.
Remove the 4 wires that go to the display card, orange in colour.
Switch the dishwasher on for 20 Seconds.
Turn off again.
Remove the eprom.
Reconect the 4 wires going to the display card.
Put the thing back together again and Bobs your aunty.
HTH
Re: Help ! I’d best get to bottom of codes !
Error Codes
f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power boardSo in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty.
HTH
Re: Indesit-Hotpoint/D&G how do I get them to work
johnnyj wrote:The problem with D & G and Indesit, is D & G pay up front for all repairs and replacements, so if if a heap of s**t that shouldnt be on a policy Indesit will try and get out of replacing as it eats into their budget. Not D & G’s
Not quite true but I wont go into it on a public forum.
Re: Indesit-Hotpoint/D&G how do I get them to work
Hi
The way it works between Indesit and D&G is as follows.
You the customer take a policy out all be it via Indesit or direct with D7G it makes no difference as they are all administrated by D&G.
You get a number to call for service which is Indesits number.
Indesit arrange for an Engineer to attend. If the appliance is repairable and the parts are available ie. Not obsolete the repair goes ahead even if there is a delay in getting parts.
If the parts are obsolete the engineer calls into the E A Team ( Exchange Authorisation Team) to write the appliance off. Before it is written off the EA Team will try and source the part from elsewhere ( Recycling, Third party suppliers etc.)
If that is not possible the appliance is written off by the EA Team. This is done by completing certain fields on Indesits call management system. The next working day ( In your case Monday) the report from the previous working day is electronicaly sent to the D&G claims dept ( Which is a different dept to the one that you call) They then imput it onto there own systems so that by the Thursday it should be showing to all on D&G’s systems.
D&G then decide on what appliance you are going to get as a replacement and they write and let you know what they are going to be doing. All this can take up to 14 working days providing your replacement is in stock.
Sorry this is a bit long winded but there is no easy way to explain it.
Re: The worlds worse kitchen thread!
Cant see why you never had a coffee there is still a bit of worktop to put your cup on 😆
Re: Hotpoint Possible turmoil?
Taken from the todays Peterborough Evening Telegraph http://www.peterboroughtoday.co.uk/news/More-jobs-will-go-at.4855369.jp
Re: Hotpoint Possible turmoil?
Heard this yesterday, also no pay rise this year for any indesit employees sign of the times me thinks
Re: My Electolux oven smokes like the fires of hell.
Did you do a burn off before first use ie. putting the oven on full to burn the coating off. All new ovens are coated and require a “burn off” this will give off a lot of smoke with an acrid smell to the smoke so windows open and no pets in the room.
HTH
Re: HOTPOINT WDD960 – SPINNING WHILST DRYING
Hi the machine is designed to do a “thermal spin” after about 20 mins. I believe that if you look in the handbook it does mention this.
Re: Hotpoint WD440G
It connects to the suppresor then via a 100 Kohm rersistor to earth, this is only used on 3 pahse motors.
Re: partfinder
Partfinder is no longer updated reguly as Service Net is the way forward for Indesit. Updates used to be done by the UK team this has now been taken over by Italy. First read of some of the translations of the service manuals can be how shall we say amusing!!
