Forum Replies Created
-
Posts
-
Re: help-bosch fault
I had a similar problem to this after replacing brushes on a bosch. Went back took out motor and completly cleaned out all the carbon dust, which sorted the problem.
Subs
Re: Seimens Intergrated FF
Fitted new compressor to this FF but as i suspected there is still a problem with either sensor or more likely control board. When you turn it on it will run for a while, sometimes 2-3 minutes or so and then cut out. If you turn it off and on again it will try to power up the compressor but cut the power to the compressor after a couple of seconds. Its as though a relay on the board or something is breaking down. Compressor i fitted is fine because ive by-pasted the control and it runs fine.
Are thes boards prone to fail?
Could it be the ntc? There is one in the fridge but i think there may be one foamed in.
Come on you Bosch/ Seimens guys, help me out here please!
SubsRe: Seimens Intergrated FF
Just thought….it must be one start one run capacitor!
Just looks like a bog standard compressor from singapore to me.Subs
Re: Beko WM1280 Motor Fault?
Hi Mike
When i tested for the voltage to the brushes i did this by just removing the leads to each brush and connecting my volt meter leads to each lead giving me 230v. Could it be the module then?
Thanks
Subs
Re: Beko WM1280 Motor Fault?
I have continuaty through the brushes armeture, field coil and tacho.
Subs
Re: Samsung Fan Housing Mod
Hi Flyman
That metal piece you mention is missing, i know the piece you mean because it came with a new evaporator and heater i bought before for one of these. I dont suppose they are available seperatly. Ill have to try and make something.Thanks
Subs
Re: Zanussi Condenser Dryer
Thanks guys.
Cab you posted the part numbers a split second before i posted my request for them!Subs
Re: Whats the most annoying thing customers do?
Me “Ill be there tomorrow between 10 and 12”
Customer ” Can you be a bit more specific i need to go out?”Customer “What you charge JUST to look at it?”
No love i charge to diagnose the fault which i cant do just by “looking at it”
im not Derren Brown.Customer “How much do you charge to fit a thermostat to a fridge
freezer?”
Me “How do you Know its the thermostat?”
Customer “Cos its not working”Customer “How much do you charge to gas a fridge”
Me “How do you Know it needs gas?”
Customer “Cos its…………….Customer “Alright mate its me, i phoned you last week about me washing machine remember?”
Re: Whirlpool Door Interlock
Thanks Chris.I did see that one but whats confusing me is that apart from the seperate spade connections it looks nothing like the one on my machine.
Subs
