Forum Replies Created
-
Posts
-
Re: LG Dishwasher LD 2060 Error code E1
been out to one of these today showing fault code E1
customer has had pump, matrix and pcb replaced under warranty but it made no difference. No leaks in base fills ok empties ok but midway through program shows E1.
Any ideas welcome.Re: Hotpoint BWD129 Overheat Problem
the machine should have a thermal cut out cable on the dryer element.
whoever changed the dryer element would have removed the thermal cut out because it would be open circuit.
I went to one of these and the pcb was faulty causing the dryer heater to be on all the time.
i ended up changing both dryer and wash elements and the pcb and the thermal cut out.Re: siemens dishwasher
resurecting an old thread got exactly the same problem with the same model of dishwasher changed the flow meter and its still the same any ideas welcomed.
Re: whirlpool akz 161 oven displays stop
if you hold in the button for a prolonged period it shoukd reset. but sometimes you have too muck about switching it off and on.
Re: Big white boxes keep on a comin’
I get the same big white boxes i never use social sites
but I am using Internet explorer. the pages are very unresponsive as well.Re: siemens dishwasher
the customer is back on the phone again he has been fighting with johnlewis but got nowhere.
I was on the siemens website but cant see a flow sensor anywhere.
anyone know the part no. thanks.Re: bosch WTE6920GB/01 dryer
hi the float switch doesnt switch the pump back on and i checked the microswitch. so it looks like its going to be the pcb.
Re: Best of the budgets.
I have a real issue with the newer Hotpoint/Indesit washing machines, this stupid blue linear pressure switch i have had 4 now which started off as blocked pumps which were cleared without even moving the machines ended up in new machines due to faulty pcbs. all this resetting carry on should not be nescessary. I would certainly not recommend anyone to buy one of these machines.
