Forum Replies Created
-
Posts
-
Re: Extracare lose Howdens?
kwatt wrote:Has anyone seen this week’s ERT?
Apparently there’s rumours that MFI will merge with Moben!
Bloody hell, the two worst companys I can think of at fitting appliances :rolls:
Re: KGN34X60 keeps frosting up – Help!
There is a permanent fix. Get back onto BSH to get it sorted.
Re: Bosch warranty
Had it not been for this forum i’d have been stuck with a 1yr guarantee!
Nah you wouldn’t. You get your two years anyway. All you need is proof of purchase.
BTW Comet will cover the first 12 months and BSH the second year.
Re: siemens siwathern 7902 tumble dryer
Are you testing it empty or with a load ?.
If it’s a sensor dryer it WILL need a damp load for it to work.
Re: Siemens KA58NP90 Side by side fridge/freezer Ice despens
There is a dispenser lock IIRC that only stops the ice dispenser but allows the water to work ok.
Check the manual for details on how to lock/unlock :rtm:
Re: Siemens Fridge Freezer KG32U123GB – Probs with temperatu
Out of interest where is it installed ?.
Is it anywhere with high temperature, or if in a unit is there plenty ventilation.
It sounds as though the pot may be cutting out on the thermal overload to me. Next time things go crazy carefully put your hand on the compressor, if it feels very hot that may be your problem.
Re: Bosch classic WTL6102GB/02
Easy peasy.
remove side panel and rear heater cover. Drop the front access flap. Undo nut on front fan.
Drop main belt off (if not already off) remove tension spring etc that sits next to pump.
Remove motor wiring, then pull the big plastic handle off of motor this is what holds the motor in place.
Once that’s off just pull the motor backwards to give access to fitting belt.
The motor must be in the correct position in order to refit the “handle”.
Shouldn’t take more than half an hour to do 8)
HTH
