Forum Replies Created
-
Posts
-
Re: Bosch D/W Clasixx
I would think the base of the m/c is flooded due to an internal leak somewhere.
This leak could be from anywhere, some are obvious some are not.
Power off please if having a look :zap:
Re: Bosch Dishwahser water level sensing
windy1 wrote:Thanks Superfix.
If the air sensor is what senses the water level, what’s the purpose of the red float chamber and s/w right next to it?
That is the overfill float. If the pressure s/w goes west then water will raise the float and bring the pump in.
Re: Bosch Dishwahser water level sensing
windy1 wrote:the air sensor tube with its blue operating rod don’t seem to be doing much, even though water can be seen flowing through the base. The microswitches click if pushed manually. There is no water in the base.
There is your answer, blue rod operates the pressure s/w.
If sump hose is clear, then possibly the chamber below the s/w is gunged up.
Power off please if having a look.
Re: Neff convection microwave H7870WOGB01
I’d be checking for an o/c thermal fuse.
Is there power to the elements ?.
Re: BOSCH D/W SGS43A52GB/35
Has the new pcb been coded?.
When you say overfilling fault, do you mean the base was flooded ❓
Re: Neff 5453X0GB/13 dishwasher overfill
aqualectric wrote:doing the job with a sprung – loaded door is like wrestling an alligator).
HTH,
Steve.
Almost impossible, if you want to keep your fingers 😀
Re: Neff 5453X0GB/13 dishwasher overfill
Bottom spray arm not clipped together properly or bottom door seal come away ❓
Re: Siemens SF24A262GB/15 complete failure
You would need a meter that reads capacitance to test it.
Does it look black or smell of electrical burning? if not it’s probably ok.
The m/c will work without it, but will interfere with tv and radio etc.
