superfix

Forum Replies Created

Viewing 15 posts - 706 through 720 (of 865 total)
1 2 3 … 47 48 49 … 56 57 58
  • Author
    Posts
  • October 30, 2005 at 8:57 pm in reply to: Dear BSH Man #141450
    superfix
    Participant

    Re: Dear BSH Man

    Can’t really remember how I sussed it out Martin 😕

    Could well have been last part on machine that hadn’t been changed 😆

    Anyway hopefully it will sort your problem 😉

    October 28, 2005 at 8:00 pm in reply to: Neff S4340X0GB/20 FD7705 Disgwasher Vey Noisy #152099
    superfix
    Participant

    Re: Neff S4340X0GB/20 FD7705 Disgwasher Vey Noisy

    Don’t forget seal kit with that motor.

    October 28, 2005 at 7:53 pm in reply to: Dear BSH Man #141444
    superfix
    Participant

    Re: Dear BSH Man

    Martin

    Have had problem in the past with dispenser actuator blowing modules in the past.

    Doesn’t show earth fault on megger, but when actuator changed, no more blown modules 😆

    October 26, 2005 at 1:52 pm in reply to: Weird screws #151885
    superfix
    Participant

    Re: Weird screws

    Try RS Goatboy

    They used to sell security screw drivers.

    HTH

    October 25, 2005 at 8:52 pm in reply to: siemens se24a230gb/17 #151763
    superfix
    Participant

    Re: siemens se24a230gb/17

    Remove plug before removing any panels :plug:

    October 25, 2005 at 8:50 pm in reply to: Bosch sgs43A43 in a loop #151783
    superfix
    Participant

    Re: Bosch sgs43A43 in a loop

    viewtopic.php?f=33&t=9007

    October 25, 2005 at 7:34 pm in reply to: Diagnosing fault with Bosch SGS 56A72 GB #151735
    superfix
    Participant

    Re: Diagnosing fault with Bosch SGS 56A72 GB

    It’s not out of guarantee!!!

    Two year guarantee with m/c. 😉

    October 25, 2005 at 7:26 pm in reply to: siemens se24a230gb/17 #151761
    superfix
    Participant

    Re: siemens se24a230gb/17

    Sounds like you have a flooded base due to internal leak.

    Engineer time I think. 😉

    October 24, 2005 at 7:35 pm in reply to: Bosch SGS45E08 leaking to base #145756
    superfix
    Participant

    Re: Bosch SGS45E08 leaking to base

    No labour or parts charges to pay on under guarantee work Martin 😉

    October 24, 2005 at 7:20 pm in reply to: Bosch SGS45E08 leaking to base #145754
    superfix
    Participant

    Re: Bosch SGS45E08 leaking to base

    Only 18 months old.

    You do know the m/c comes with a 2 year guarantee from BSH, which is now void!!!

    October 24, 2005 at 7:12 pm in reply to: bosch reset stat #151565
    superfix
    Participant

    Re: bosch reset stat

    Blocked condenser perhaps.

    October 24, 2005 at 12:33 pm in reply to: Bosch dishwasher #151527
    superfix
    Participant

    Re: Bosch dishwasher

    Depends where it’s leaking from.
    Most jobs just work in the small space. Before stripping it down just make sure bottom spray arm is fastened together properly.

    Other favourites for leaks are the heater and motor seal.

    October 22, 2005 at 12:49 pm in reply to: Bosch KGU 3201 /GB 07 won’t keep cold #151354
    superfix
    Participant

    Re: Bosch KGU 3201 /GB 07 won’t keep cold

    Sounds like a frozen evapoator to me.

    Possibly an o/c heater.

    Best call an engineer.

    October 21, 2005 at 8:46 pm in reply to: Bosch SGS43A42GB/01 won’t stop filling #151337
    superfix
    Participant

    Re: Bosch SGS43A42GB/01 won’t stop filling

    Then needs repair kit fitting, contact BSH.

    October 21, 2005 at 8:39 pm in reply to: Bosch SGS43A42GB/01 won’t stop filling #151335
    superfix
    Participant

    Re: Bosch SGS43A42GB/01 won’t stop filling

    On your overfill “mushroom” how big are the cutouts on it?.
    If they are about 3-5mm high, then there is modification kit available for the m/c.

    If so contact BSH Appliance Care on 08705678910.

  • Author
    Posts
Viewing 15 posts - 706 through 720 (of 865 total)
1 2 3 … 47 48 49 … 56 57 58