SWERV

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 743 total)
1 2 3 … 17 18 19 … 48 49 50
  • Author
    Posts
  • August 21, 2012 at 4:18 pm in reply to: Bosch dishwasher help! #379896
    SWERV
    Participant

    Re: Bosch dishwasher help!

    Thanks for the info.
    Merv

    August 15, 2012 at 7:10 pm in reply to: Aeg washer dryer (914601902 02 #379475
    SWERV
    Participant

    Re: Aeg washer dryer (914601902 02

    Thanks very much.
    Merv

    August 15, 2012 at 2:39 pm in reply to: bosch HME9760GB/01 #379471
    SWERV
    Participant

    Re: bosch HME9760GB/01

    Those boards do not need programming, it will probably need one of the display boards, just not sure which one.Sorry, I can’t tell you what E5 means.
    Merv

    August 9, 2012 at 6:23 pm in reply to: Stoves b/i Double oven 900GDO #379281
    SWERV
    Participant

    Re: Stoves b/i Double oven 900GDO

    Thanks Tell, I have had a look at the hinge and it looks like screws go through the side of the hinge. That would mean that I would have to get to the screws from underneath or from the back. Either way it looks as though the oven will have to come out, which I am a bit reluctant to do as it is gas.
    Merv

    July 29, 2012 at 2:48 pm in reply to: Neff combi oven C67M70SOGB #378590
    SWERV
    Participant

    Re: Neff combi oven C67M70SOGB

    Thanks for the info.
    Merv

    July 27, 2012 at 1:40 pm in reply to: Neff combi oven C67M70SOGB #378588
    SWERV
    Participant

    Re: Neff combi oven C67M70SOGB

    Thanks, they did say that they have had a few power cuts.
    Merv

    July 26, 2012 at 7:51 pm in reply to: Neff combi oven C67M70SOGB #378586
    SWERV
    Participant

    Re: Neff combi oven C67M70SOGB

    Bump anyone??

    July 25, 2012 at 2:35 pm in reply to: Sharp m/w #378559
    SWERV
    Participant

    Re: Sharp m/w

    Part number DPWBFC047WRKZ.
    Merv

    July 11, 2012 at 6:43 pm in reply to: Cooker Hood manufacturer? #378006
    SWERV
    Participant

    Re: Cooker Hood manufacturer?

    Thanks Lee, I am after the transformer for it. Any ideas?.
    Merv

    July 11, 2012 at 2:13 pm in reply to: Cooker Hood manufacturer? #378004
    SWERV
    Participant

    Re: Cooker Hood manufacturer?

    Thanks Don

    July 10, 2012 at 4:37 pm in reply to: Candy Oven FL0100x #377929
    SWERV
    Participant

    Re: Candy Oven FL0100x

    Base element 41024103, Grill element 41010686. Both listed on connect and masterpart.
    Merv

    July 5, 2012 at 3:22 pm in reply to: belling #377779
    SWERV
    Participant

    Re: belling

    They are showing as in stock at masterpart if that helps.
    Merv

    June 21, 2012 at 6:13 pm in reply to: samsung rs21jgrs #376931
    SWERV
    Participant

    Re: samsung rs21jgrs

    Thanks Ally,
    I have sent you a pm.

    Merv

    June 19, 2012 at 6:23 pm in reply to: Old hotpoint 9949 #376832
    SWERV
    Participant

    Re: Old hotpoint 9949

    Thanks Jim, seems like I’ve hit a brick wall with this.

    June 19, 2012 at 5:59 pm in reply to: Old hotpoint 9949 #376830
    SWERV
    Participant

    Re: Old hotpoint 9949

    hmmm, I forgot to mention, but that was the first one I ordered, and it is the same. I have also ordered the latch kit. They supply two different latch plates in the kit, the smaller plate with the pecker fits the door trim fine. But it is the larger plate that this one has, and the spacing for the screw holes do not tally up with the trim. 😕
    Merv

  • Author
    Posts
Viewing 15 posts - 256 through 270 (of 743 total)
1 2 3 … 17 18 19 … 48 49 50