Forum Replies Created
-
AuthorPosts
-
Tom
ParticipantRe: Cheap (sorry) washing machine needed
My experience having sold and serviced a fair number of makes / machines suggests Bosch has the edge..
We just have far less hassle with Bosch.
The Bosch WAE24377GB should be close to your budget.
They have a 2 yeat guarantee as well.
They can do 1 hour washes @ 40 degrees as well if required.
They are easy to operate.
tomDecember 3, 2015 at 1:22 pm in reply to: Can I get a Non Sealed Tub Washing Machine Sub £500? #433330Tom
ParticipantRe: Can I get a Non Sealed Tub Washing Machine Sub £500?
I think the montpellier machines have split drums.
tomTom
ParticipantRe: ignition unit connections
Martin, many thanks for your post.
When printed it shows up not too bad.
I’ll send on the product number later in case it is of relevance.
I’me probably hoping for too much detail regarding the ignition unit connections i.e. coloured wires & ht lead — physical positions .
I dont want to strip it to pieces to trace the wires, if I can help it.
Everything is working as it should but am suspicious that wires were got at beforehand.
tomTom
ParticipantRe: samsung oven BF641FB not heating
Many thanks for your response.
The customer was in a hurry & they have gone to find samsung so its academic for now.
I did examine the selector switch & it looked in very good condition; no burn marks; good positive mechanical operation.
I have been thinking about this since and wondering if the a non resetting toc could have operated letting the control board think it was too hot already. The cooling fan was running immediately so not sure if the toc is supposed to be N/C or N/O. There are two tocs one above the oven and one to the rear.
With hindsight there were more voltage checks I could have done.
Maybe someone familiar with this model would like to comment.
tomTom
ParticipantRe: Bosch washing machine not rinsing properly
Came across a case a bit like this.
The customer reported symptoms like yours.
It turned the machine was not heating and after a period of time; aborted the wash program without doing any rinsing.
The customer thought the machine had finished the full program as they did not observe it throughout and were unaware that no heating had taken place.
The machine was a Bosch but not your exact model.
Heater failure is not so likely as your machine is almost new; but nevertheless something else to consider!
Bosch carry a two year guarantee in any case.
tomTom
ParticipantRe: Bosch washing machine not rinsing properly
virtually impossibly but not totally. I’ve seen it! Admittedly it was not the regular user of the machine. I just thought it would be useful to rule out this possibility.
tomTom
ParticipantRe: Bosch washing machine not rinsing properly
just seeing this post now.
I’ve seen a case where detergent powder accidently got into the prewash section of the drawer as well as main wash compartment. The machine was being set to do a normal wash (no prewash). This powder was then taken in during he rinses. It took several rinse programs to get the machine clear of suds. Not sure if this would apply to your model.
tomTom
ParticipantRe: Machine only smell during wash
Could be worth checking the condition of the socket outlet and 13A plugtop (or other means of mains supply connection, e.g. isolator switch etc). Have seen this responsible for fishy smell.
Be sure to turn off power before any dimantling anything.
For your safety it would be best to employ an Experienced professional electrician if any part of the electrical installation needs replacing, as they will inspect and test appropriately.
tomTom
ParticipantRe: carbon brush colour code
reassuring! Thanks Martin.
tomTom
ParticipantRe: whirpool adp2315 toc
Sorry no luck yet but still searching.
Tom
ParticipantRe: whirlpool SIOS discs
thanks Allsorts & eastimark for replies. yes it’s been a few years now. We found the information on them helpful when ordering spares. I’ve heard something about a source costing £144.00 but nothing more.
tomTom
ParticipantRe: tecnik oven door seal
thank you for your reply.
will see how I get on with this Part No
tomJanuary 19, 2012 at 11:55 pm in reply to: Whirlpool tumble dryer AWZ7813 let down by electronics. #367466Tom
ParticipantRe: Whirlpool tumble dryer AWZ7813 let down by electronics.
😥 Not able to help you other than empathise with you. I’ve had a number of these fail too with the same faulty transformer. exhaustive searching but never found a replacement transformer. Certainly puts me off sellling/suggesting whirlpool. but then there is not a lot you could stake your reputation these days.
tomTom
ParticipantRe: bosch wte84102 error codes
I realize this enquiry started a while back. I’ve to go to one of these with same symptoms including beeping sound— beebs three times then a gap 3 more beeps another gap & then 3 more beeps; then a longer gap before resuming the cycle again.
Just wondering if the fault was identified. Also, any pointers from a bosch guru (past or present)would be very welcome.
Many thanks in advance.
tomTom
ParticipantRe: lg WM-1080FHD washer bearings
Really pleased with the speed and number of reponses. Many thanks. Good to know that it is a reasonably straightforward job. Now I go with confidence.
tom -
AuthorPosts
