[Tom]

Re: Candy CIV60 fan removal

Thanks Bob.
I figured the same solution. I managed with two 5mm holes, diagonally opposite & there was a mould ring to judge the same radii so should be dynamically balanced; now back together with screwlock for insurance.
tom

[Tom]

Re: Candy CIV60 fan removal

Thanks Martin.
It certainly looks as if it isn’t meant to come off.
🙁 Seems a pity that the 3 screws securing the cowl cannot be tightened; one has come out causing a noise which alerted the customer.
No other fault is present.
I imagine the cost of a replacement motor assembly will make this BER.
The customer will be delighted with Candy.

[Tom]

Re: teka oven hinges

😀 Your help is much appreciated.
Best Regards tom

[Tom]

Re: CANDY CIV60 DRYER

😀 many thanks Steve.
best regards tom

[Tom]

Re: Fagor dishwasher VFU-651T stat required

❓ I have one of these dishwashers which takes in water & circulates for a few minutes then puimps out and flashes No 2 led alternately with No 1, 3 & 4 together (counting from the left.
This is not listed in the known fault codes.
There is not heating action although the element tests OK. Will check the thermostat as suggested (resetting).
Also need the steel band which connects door to door spring if any one has P/No or stock
Thanks for any help
tom

[Tom]

Re: aeg competence B83490

🙁

Is this all behind the control panel ? They form an “L” shape if viewed from the side. If it is it comes as a complete assembly, part number 8996619267801.

This sounds about right.
The oven is an expensive high spec. However I’me sure the owner will not be best please at the total bill.
The oven had been run on a cleaning process Ok. The next time it was tried the catastrophic failure ocurred.
many thanks for your help
tom

[Tom]

Re: aeg competence B83490

Hi Dave & thanks for the quick reply.
NNc No 944 181 793
Typ 91AGF04GE
S No 138 18671

some info on the electronics:
Prima Display
330 300 620
21817820-0 D

regards,
tom

[Tom]

Re: dh104w

😀 thankyou for quick response iadom.
Regards,
tom

[Tom]

Re: Electruepart

🙁 I’ve given up on electrue. I can get all the spares + finished goods from alternative suppliers who seem much more interested in / appreciative of, getting the orders. I suppose it might be different if I had agency work wiyh Electrue.
Regards,
tom

[Tom]

Re: thomson twintub

Our local Qualtex agent has a t/tub on display

Thanks for your reply.
have just learned of retailer with stock so will visit him to have a look.
sound like the thompson (chinese made!)
Regards
tom

[Tom]

Re: pannellable dishwasher door

Can you give a little more info please Tom?

Thanks for your reply Don.
60 cm with 3mm panel; as you say, referred to as a Decor Panel.
Regards,
tom

[Tom]

Re: thomson twintub

🙂 thanks for your reply chris.
A bit more background to my original posting.
I’ve had a dry cleaning business looking for a twintub.
Apparently the twintub is particularly suited for some particular treatment/process they carry out.
They have used a Hoover in the past.
I want to avoid supplying something that behaves differently only to find that it is unsuitable.
tom

[Tom]

Re: Guarantee cards in new machines.

Recently there has been instances where an extended guarantee promotion has worked in reverse, when the customer realized that I would not be carrying out any of the work.
They preferred to buy a machine with normal guarantee so that I could do the repairs.
I encourage customers to let me know of any problems in or out of guarantee. This maximises customer in contact.
I get plenty of word of mouth references because I take the interest.
The big shops hardly offer this!
Under extended guarantees & customer might be gone for good.
tom

[Tom]

Re: servis 2301

😀 Thanks Barry.
The 57 & 40 is the essential info I was looking for.
If I need to I will get back to you.
Best regards tom.

[Tom]

Re: whirlpool spares

Thanks for prompt replies.
Connections looks promising but will speak to ASD on Monday; hadn’t heard of them so they may be useful for future.
tom

[Author]

Posts