Forum Replies Created
-
Posts
-
Re: Zanussi WJS 1265W 91460200500 Part no Required
Thanks for the quick response its for my sisters machine so no money to be made on this one 😥
TurboRe: Zanussi wjs 1265 addition
Sounds like the front bearing has completely broken up leaving the shaft to spin freely on the back bearing only. Try forceing some up and down movement on the front edge of the drum there should be no movement at all.
TurboRe: WFF2001GB/01 No Spin
Will have another look at brushes but did seem ok and the wash action seems fine. I was wondering if it could be the pressure switch playing up? Is there a test cycle that can be run on this model. Thanks Martin
TurboRe: Which one is better ?
Its the Bosch for me, even though this model has only been out for about 6 months.
TurboRe: So, what are the new Miele’s like?
I agree the change has been too radical they should have stuck to the classical style. In two years time the new model will look about as modern as a Ford Probe. 😆
Turbo.Re: Hoover SE 220 Disp to Pmp Hose?
Fitted hose Prt no 91620000 this morning thanks for the help. 😆 It had Parts Centre & Connect baffled not an easy one to find. 😕
TurboRe: Hoover SE 220 Disp to Pmp Hose?
Sorry for leaving out HOOVER oops! have changed the heading. Thanks for all the help. Turbo. 😆
Re: Guaranteed Repairs
If you tell them that plastic parts and door gasket are not g”teed on the first visit they will be more careful in future. I also stress that Hpt T/d thermostats are not g”teed, one customer used to get through 3 sets a year due to a high turnover of nannies who were never told they had to clean the door filter. Still nice little earner she never complained 😉
TurboRe: Dom/Appliance Poverty Trap
Point taken about the Zanussi T/Bendix Electrolux, the more sales I can deny Merloni the better 😉
Turbo
Re: zanussi zwf 1010w
Had this same problem with a Zan FS 1555W it turned out to be a faulty door lock. 😆 I believe your machine uses the same door lock Prt No 1249675123. The faulty one I removed had a brown scorch mark where it had burnt out internally. Could be the board though if a new lock fails to sort it. 😥
Turbo.Re: Engineers who want no work
Quite busy at the moment but June was a bad month for me often getting only a couple of calls a day 😥 However I expect the school holidays to be another barron spell 😥
TurboRe: BEST WASHING MACHINE
Have been recommending the Bosch to my customers for over 6 years now and they all seem happy. The latest value for money model is the Bosch WAE 24162 it comes with a 2 year parts & labour gtee but you must send off the paper work to qualify for the second year.
TurboRe: Digital Clocks
Had a word with the customer and her neighbours have been having similar problems. It turned out that a substation went pop while they were on holiday a couple of weeks ago so they came home not knowing that their supply was now coming from an EMERGENCY GENERATOR 😈
Pretty bad of the supplier not to notify them of this situation.
Mind you the poor blighters living next to generator did not need telling its been driving them nuts apparently. 😈
So yes they have all had Digital Clock problems but the Gas Boiler clocks seem to be unaffected which mystifies me 😕
Turbo.Re: Dishwasher Engineers 2??
Electrical Engineer 😆 Titles Titles and more blooming Titles me thinks this one will run for ever.
