Turbo

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 428 total)
1 2 3 … 27 28 29
  • Author
    Posts
  • August 14, 2012 at 6:33 pm in reply to: LG WD12336AD Drum Paddle #379432
    Turbo
    Participant

    Re: LG WD12336AD Drum Paddle

    Looks like your suggestion is the answer bazza as I was the engineer that went there and it had me baffled and like you say the paddles must have been fitted before the drum was formed.
    What planet are these design engineers on!!!!

    July 24, 2012 at 7:50 pm in reply to: Servis Quartz Plus tripping household RCD #378555
    Turbo
    Participant

    Re: Servis Quartz Plus tripping household RCD

    Could be many things including the motor. This machine must be 30 years old and 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the parts are obsolete. Time for a new one really. 🙁

    Graham

    July 3, 2012 at 5:53 pm in reply to: Siemens Washing M/C Heating Problem? #360330
    Turbo
    Participant

    Re: Siemens Washing M/C Heating Problem?

    Never did solve the problem on that one Mike as she brought a new machine. Can only assume it was a module problem. How did you get on?

    January 20, 2012 at 10:34 am in reply to: SRS 43E02 GB/18 Module Install Info #367532
    Turbo
    Participant

    Re: SRS 43E02 GB/18 Module Install Info

    Sorry Bob I should have explained that she had the upgrade over 6 months ago and since then the quick wash shows 85 mins. The installer insisted that was ok. I have suggested she calls them back but she seems reluctant.

    Graham

    December 10, 2011 at 8:43 pm in reply to: W/Knight CL372 WV Drum Earth Strip? #365109
    Turbo
    Participant

    Re: W/Knight CL372 WV Drum Earth Strip?

    Hi Don

    I did contact Crosslee and ordered the part from them. Had to buy heater box and heater complete.

    Many thanks

    Graham

    November 21, 2011 at 6:56 pm in reply to: Siemens Washing M/C Heating Problem? #360328
    Turbo
    Participant

    Re: Siemens Washing M/C Heating Problem?

    Got a call back to this one today, same fault 😥
    Any suggestions?

    Graham

    October 11, 2011 at 5:50 pm in reply to: Siemens Washing M/C Heating Problem? #360326
    Turbo
    Participant

    Re: Siemens Washing M/C Heating Problem?

    Thanks Pinky, problem solved. You saved me a load of money as I was going to fit a new board.

    Thanks again.

    Graham

    October 3, 2011 at 6:00 pm in reply to: Siemens Washing M/C Heating Problem? #360324
    Turbo
    Participant

    Re: Siemens Washing M/C Heating Problem?

    Do I need the pressure switch and bracket? Looks like the p/switch is prt no 619600 but can`t spot the bracket.

    Thanks Pinky

    September 13, 2011 at 8:02 pm in reply to: Bosch using too much salt? #358607
    Turbo
    Participant

    Re: Bosch using too much salt?

    Thanks Martin I will order one.

    Graham

    September 12, 2011 at 6:43 pm in reply to: Bosch using too much salt? #358605
    Turbo
    Participant

    Re: Bosch using too much salt?

    Still struggling with this one 🙁
    Any ideas?

    Graham.

    August 17, 2011 at 4:10 pm in reply to: bosch wae24464gb/03 #357350
    Turbo
    Participant

    Re: bosch wae24464gb/03

    Module or earth fault on heater maybe?

    July 4, 2011 at 6:24 pm in reply to: Bosch dishwasher free call????? #354675
    Turbo
    Participant

    Re: Bosch dishwasher free call?????

    Does not surprise me as I have changed a number of these that have got very warm to say the least 😯
    Will refer them to Bosch from now on. Thanks for this info.
    Graham.

    June 26, 2011 at 7:42 pm in reply to: Bosch Exxcel SRS45E02GB/18 tripped RCD now completely dead. #354252
    Turbo
    Participant

    Re: Bosch Exxcel SRS45E02GB/18 tripped RCD now completely de

    Element and main board are a possibilty. Unlikely to get any change out of £250. Worth getting someone to check it out.

    Graham

    June 24, 2011 at 5:35 pm in reply to: Bosch Exxcel smells awful, despite using Affresh, boil wash #353991
    Turbo
    Participant

    Re: Bosch Exxcel smells awful, despite using Affresh, boil w

    The waste pipe could be blocked though!

    Graham

    June 22, 2011 at 8:33 pm in reply to: Bosch Exxcel smells awful, despite using Affresh, boil wash #353987
    Turbo
    Participant

    Re: Bosch Exxcel smells awful, despite using Affresh, boil w

    When using Affresh or biological powder to clean your machine I would recommend filling the machine up on the rinse cycle first as the water level is a lot higher. Once it stops filling turn timer dial to stop position for a few seconds then set to 90 degrees and push start button. This will ensure water splashes up to the top of the drum. This method is not possible on some bosch models I have found.
    As others have pointed out though it does look like a new machine 🙁

    Graham

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 428 total)
1 2 3 … 27 28 29