[Turbo]

Re: WFT2800GB/12 Not Heating Water

Thanks Greg
Very helpful advice, waiting for customers to decide.
Turbo.

[Turbo]

Re: Hotpoint 7810W tripping circuit breaker

Sounds like a broken wire or a leak onto the electrics to me. Doubt if it is the element as it goes through the heat cycle without tripping.

Turbo

[Turbo]

Re: Is a condenser dryer worth it?what should i look for?

Would always go for a vented dryer myself as they are so much more efficient than a condenser system. If she insists go for a Zanussi TCE7127 or if she really wants to push the boat out go for a meile T224 or T234.
Good Luck
Turbo

[Turbo]

Re: Indesit Dishwasher IDL500UK2

Seems to go through the cycle ok with no heat so will give the timer a go.
Thanks for the advice
Turbo

[Turbo]

Re: Calling those who’ve had detergent training

I always thought the washing m/c manufacturers did not recommend water softners for fear of them not being set correctly therefore corroding the alloy drum shaft 😥 could be wrong 😥

[Turbo]

Re: hpt td stats

Have to agree with Bob on this one thermostats should never be reset unless there is a obvious reset button built in. Its just not worth the risk of a fire.

[Turbo]

Re: Bosch WFR 2860 long cycle times

Sounds like the heater to me. Put it on a 90 degree wash then see if it is getting hot after about half an hour.

[Turbo]

Re: Indesit D63

Might find the base is flooded, normally caused by a leaking wash pump. Would need a new wash pump complete if this is the case. 😥

[Author]

Posts