[washermanuk]

Re: re Bosch WM showing F04

Hi matey i had same fault code turned out to be drain pump intermittently
not starting was worn out and jamming! it could be that?
hope it solves your problem Brian

[washermanuk]

Re: New World Oven NW90G – grill switches off, knobs melt

sorry for delay! Sounds more like the fan seizing ?

[washermanuk]

Re: HOOVER HNMF

Thanks Chris (aka penquin45) got the info!
I now know why i hate fixing fridge freezers :rolls:
Looks aright performance
What puzzles me? why did’nt Gias tell me about the tech bulletin when i spoke to them? for gods sake we have a account with them?
Thanks again im really going to enjoy doing that one (NOT)

[washermanuk]

Re: HOOVER HNMF

Hi Chris my email is correct on my profile,
might be my end will try and sort it , if you can resend info please send here info@electricalsales.co.uk
Many thanks BRIAN

[washermanuk]

Re: waste disposals

MIGHT BE CUTTERS BLUNT OR WORN OUT?

[washermanuk]

Re: HOOVER HNMF

THANKS GUYS A BIG HELP 😉
CHRIS DID YOU SEND THAT STUFF TO MY WORKS EMAIL?

[washermanuk]

Re: miele dryer

did you try it with some clothes in? these will end the programme without damp washing in? also check two carbon brushes on top of the drum for wear
will try and get some tech info from work tomorrow fault codes etc cannot think off hand matey

[washermanuk]

Re: Miele G646 Dish Washer

temp sensor in sump? heater relay? wire break? also has a seperate pressure switch for heater mounted near motor? will only put heater on when enough water is circulating! if my memory serves me 😕
solinoid on dispenser a possibility
hope this helps? 😉

[washermanuk]

Re: New World Oven NW90G – grill switches off, knobs melt

POSSIBLE COOLING FAN NOT RUNNING?
CAN YOU FEEL A SLIGHT BREEZE FROM VENTS 😉

[washermanuk]

Re: call out charge

Dont forget your also charging for your years of experience 😉
Which you cannot put a price on!!!

[washermanuk]

Re: Miele G1143 SC Dishwasher

machine still faulty or been resolved?

[washermanuk]

Re: creda tumble dryer T601CW

Hi matey 9 times out of ten no heat means the green spot thermostat has tripped and needs replacing?
most causes are blocked or restricted vent, not keeping filter clean or opening the dryer door before program finishes this may cause machine to overheat ie:last ten mins is the cooling down
hope this helps?

[washermanuk]

Re: Miele G 606 SCI Plus dishwasher problem

Hi matey! have you checked the pump? you can gain access by removing a spring clip and cover underneath the filter.
Look at your instruction book this will tell you exactly how to do this.
if impellor is free please give more details 😉

[washermanuk]

Re: washing machine with r/h door hinge!

Hi matey did’nt there used to be a spanish made Bosch that opened that way? not sure if still available
Regards Brian

[washermanuk]

Re: Miele W844. Won’t Spin. Flashing ‘Rinses’ light.

please note Miele offer a ten year guarantee on the motors! but only if you get their own engineers to call?

[Author]

Posts