washermanuk

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 165 total)
  • Author
    Posts
  • in reply to: Rosieres range serial no #302408
    washermanuk
    Participant

    Re: Rosieres range serial no

    I think its under one of the sliding drawers?

    in reply to: miele dryer t224 #302401
    washermanuk
    Participant

    Re: miele dryer t224

    Hi matey just to confirm the Drying and Hand drying lights are flashing?
    have you tried unplugging for 5 mins? and set off again?
    Will get info tomorrow for you 😉

    in reply to: MIELE W863 Stuck on wash #300191
    washermanuk
    Participant

    Re: MIELE W863 Stuck on wash

    Okay matey found the fault code!!!
    Machine programme has been disturb during last wash cycle!!!!!! IE: Programme dial been moved during last wash cycle?
    You just need to set it back on last wash selected and let it finish this cycle? If customer does not remember which wash prog she last set it on :rolls: i think i can remember having one like this before, i clicked the dial round slowly on each programme till the machine started again …
    hope this helps let me know if this does not cure the fault and ill ring miele tech again!!! 😉 Brian

    in reply to: Integrated Hood Not Working #302293
    washermanuk
    Participant

    Re: Integrated Hood Not Working

    Hi one possibility could be the microswitch not functioning? which is built into the channel of the door you pull open! Or the sliding switches both are very comman faults!! Hope this helps and please power off if your going to take any covers off?
    Regards Brian

    in reply to: The 0800 Thread #300884
    washermanuk
    Participant

    Re: 0800 Repair

    Wonder what the call out charge is? 😉

    in reply to: Merloni subcontractors #300632
    washermanuk
    Participant

    Re: Merloni subcontractors

    I think my boss will hopefully use his head 😆 And only pass on all the crappy module and drum changes only 😉
    surely peeps wont pay £120 just for door lock change 😯

    in reply to: Miele pump handle :/ #300267
    washermanuk
    Participant

    Re: Miele pump handle :/

    Not sure if we have one matey? you should know where we are? 😉
    Electrical Sales (Nelson) Ltd, 63 Gisburn Road, Barrowford, Lancashire

    in reply to: Homark oven help #300338
    washermanuk
    Participant

    Re: Homark oven help

    Hi! just check your top oven control knob, on some cookers you need to turn this to grill function then set temp? which would be the one your trying to use.
    hope this is useful
    Brian

    in reply to: Man Flue & Elton John #300305
    washermanuk
    Participant

    Re: Man Flue & Elton John

    watch this now this is how i feel but still work 😆
    http://www.youtube.com/watch?v=rXLHWmjA5IE

    in reply to: MIELE W863 Stuck on wash #300190
    washermanuk
    Participant

    Re: MIELE W863 Stuck on wash

    sorry still cannot access 😥 could not log on disc out of date or web site issues? try mon 😉

    in reply to: MIELE W863 Stuck on wash #300189
    washermanuk
    Participant

    Re: MIELE W863 Stuck on wash

    Hi matey will try and find out for u tomorrow on my tech disc just cannot remember off hand?
    regards Brian

    in reply to: Stoves Double Oven/Grill LPG Model no 050507077 #297638
    washermanuk
    Participant

    Re: Stoves Double Oven/Grill LPG Model no 050507077

    Please remember you can only try this oven with all panels refitted after fitting parts? due to the pressure switch to activate gas valves etc!!!

    in reply to: BEKO CERAMIC HOB DC5442W #299940
    washermanuk
    Participant

    Re: BEKO CERAMIC HOB DC5442W

    Might be worth a look? check the links on the mains inlet connections?
    one might be loose or burnt? IE: L is linked with numbers 1,2 and 3.
    Check your instuction book for wiring connections.
    power off tho

    in reply to: Miele G2872SCVi… F14 #300073
    washermanuk
    Participant

    Re: Miele G2872SCVi… F14

    F14 on dishwasher is indicating a blockage, poor water pressure or could be a fault with the pump pressure level switch or circulation pump.
    Hopefully its just a blocked drain pump?

    in reply to: Candy CM126 leak #300071
    washermanuk
    Participant

    Re: Candy CM126 leak

    Hi! Yes i can happen but this is normally caused either by a blocked dispensor hose when the user is putting 2 much powder in and it builds up in the bend of the hose? Or the jets in the top of the dispensor are badly gunked up and do not spray neatly into the dispensor drawer but spray out down the front? Is machine only doing it when its filling? or filling too high ie: blocked or faulty pressure system? Or not draining fully and going into spin with alot of water in the tub? or machine going into spin when it should tumble?
    Hope this helps 😉

Viewing 15 posts - 106 through 120 (of 165 total)