Washman

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 894 total)
1 2 3 … 17 18 19 … 58 59 60
  • Author
    Posts
  • January 30, 2010 at 3:52 pm in reply to: Whirlpool Wash Pump #310528
    Washman
    Participant

    Re: Whirlpool Wash Pump

    Hi

    That part no comes up as £129.25 to me on Connect.

    Mike

    January 25, 2010 at 6:43 pm in reply to: Useful syringe #310084
    Washman
    Participant

    Re: Usefull syringe

    Hi

    £7.23 to me

    Mike

    January 25, 2010 at 1:28 pm in reply to: spam #308844
    Washman
    Participant

    Re: spam

    Hi

    More Spam in General Enquiries Forum………

    Mike

    January 23, 2010 at 1:35 pm in reply to: Bosch WAE2416S Water not heating? #309786
    Washman
    Participant

    Re: Bosch WAE2416S Water not heating?

    Hi

    After 3 or 4 rinces with cold water the washing will be cold, this is normal.

    Washman

    January 21, 2010 at 4:00 pm in reply to: Indesit IDC 75 tumble dryer #309578
    Washman
    Participant

    Re: Indesit IDC 75 tumble dryer

    Hi

    That is the correct sequence , with only short reverse tumble.

    Washman

    January 19, 2010 at 6:35 pm in reply to: bosch dishwasher model sgs56e12gb/01 #309283
    Washman
    Participant

    Re: bosch dishwasher model sgs56e12gb/01

    Hi

    Most likely the hose from fill matrix to sump blocked causing water to back up. Clean out that hose and machine should work OK.

    Mike

    January 10, 2010 at 12:00 pm in reply to: Bosch filter stuck #308353
    Washman
    Participant

    Re: Bosch filter stuck

    Hi

    WD40 is no good filter and housing are plastic.
    It will be something stuck in filter , so removal of pump and filter from machine is only option.

    Washman

    January 1, 2010 at 12:18 pm in reply to: Spam alert #298452
    Washman
    Participant

    Re: Spam alert

    Hi

    Spam in General Appliance forum

    Mike

    December 27, 2009 at 1:10 pm in reply to: Servis Tumble Dryer not heating…. #307193
    Washman
    Participant

    Re: Servis Tumble Dryer not heating….

    Hi

    From serial number model is M200W-1UK


    mIKE

    December 27, 2009 at 10:51 am in reply to: hoover crystaljet 7000 #302665
    Washman
    Participant

    Re: hoover crystaljet 7000

    Hi

    Its a 1995/96 model.

    Mike

    December 23, 2009 at 8:21 pm in reply to: Another Hotpoint Heat Problem #307106
    Washman
    Participant

    Re: Another Hotpoint Heat Problem

    Hi

    Are the condenser and filter both clean.

    Washman

    December 21, 2009 at 6:29 pm in reply to: SPAM IN GENERAL APPLIANCE FORUM #306233
    Washman
    Participant

    Re: SPAM IN GENERAL APPLIANCE FORUM

    Hi

    More spam in general appliance forum

    Mike

    December 10, 2009 at 1:08 pm in reply to: Bosch WFT2800gb/13 error code 3- #306107
    Washman
    Participant

    Re: Bosch WFT2800gb/13 error code 3-

    Hi

    Fault code #3 = Has not reached temperature setting . Only shows at end of program.


    MIke

    December 6, 2009 at 3:28 pm in reply to: Siemens oven HB28054GB not working #305680
    Washman
    Participant

    Re: Siemens oven HB28054GB not working

    HI

    This model uses the bottom and grill elements only for oven , no seperate fan element.


    Washman

    November 30, 2009 at 7:42 pm in reply to: Bosch SRS46A02GB/08 will not fill – not inlet valve. #305281
    Washman
    Participant

    Re: Bosch SRS46A02GB/08 will not fill & it’s not the inl

    Hi

    The red rod is part the anti flood device, there is a polystyrene float under it so if machine leaks into base the float rises to cut the water supply and bring the drain pump on so that the machine does not flood your kitchen.
    Is any water getting into the matrix on the side of machine.

    Washman

  • Author
    Posts
Viewing 15 posts - 256 through 270 (of 894 total)
1 2 3 … 17 18 19 … 58 59 60