Forum Replies Created
-
AuthorPosts
-
Washman
ParticipantRe: ASE 3110
Hi
Part # 769038700 oven outer glass , according to connect no longer available.
Remember Servis went bust some time ago.Mike
Washman
ParticipantRe: Diplomat Dishwasher ADP8332
Hi
The small pcb by the flow meter is just a magnetic swich. If its playing up tighten up the plug. If still playing up you need to replace the “can-measuring ” as its called on parts diagram
Mike
Washman
ParticipantRe: r600
Hi
The use of nitrogen being blown through the system is to stop the risk of an explosion when a welding torch or blow lamp is used.
Samsungs blow up with with just spark from a switch or short.Mike
Washman
ParticipantRe: LG Microwave Working but not heating up – HELP
Hi
If you have opened up this microwave be very careful , the capacitor in the microwave can hold a very high voltage, even when swtched off.
Microwaves ovens can kill if you touch the wrong part.
Washman
February 18, 2010 at 1:14 pm in reply to: Recoding PCB from different machine? zanussi wjs1265w #312361Washman
ParticipantRe: Recoding PCB from different machine?
Hi
You seem to have at least 4 topics running on the same subject, it would be better to kept every thing in one place.
Washman
Washman
ParticipantRe: AEG Competence D2160-1 Noisy Fan
Hi
The cooling fan needs replacing.
Washman
Washman
ParticipantRe: servis washing M6515S
Hi
The easiest wy to find the PCB,s is remove the top and have a look.
Switch off and pull the plug for safety.Washman
February 9, 2010 at 7:40 pm in reply to: servis m6002 repetitive 3 flashes on start/pause button #311523Washman
ParticipantRe: servis m6002 repetitive 3 flashes on start/pause button
Hi
Was the board pre programed , if not it is waiting to be programed with the Janus programer device.
Mike
Washman
ParticipantRe: wheres the work gone?
Hi
Same here only getting about 3 jobs a day at the moment.
Mike
Washman
ParticipantRe: Diplomat Elite
Hi
The base underneath will be flooded, pull machine out and tip back at 45degrees have towels ready to mop up water.
Make sure you unplug first. And leave machine to dry out before switching back on.Washman
February 4, 2010 at 7:19 pm in reply to: BEKO WM5120W are they any good and is £168.99 a good price? #311027Washman
ParticipantRe: BEKO WM5120W are they any good and is £168.99 a good pri
HI
Only if you can afford to buy a new machine every year.
Washman
Washman
ParticipantRe: Panasonic washing machine, any opinions?
Hi
Most quick washes on machines are for small loads ie:- 2.5kg or less.
Mike
Washman
ParticipantRe: Bosch (D/W) SGS43T22GB/01
Hi
Part #188106 float .
Hope that helps, it is on the drawing on Bosch Eshop page 5 for that modelMike
Washman
ParticipantRe: Bosch (D/W) SGS43122GB/01
Hi
Check that model number there should be a letter between the 43 and 22
MikeWashman
ParticipantRe: Easilogic M6100W-EV
Hi
Its A Servis made by Vestel . Sold through B&Q and Tesco.
Mike
-
AuthorPosts
