Forum Replies Created
-
AuthorPosts
-
September 28, 2009 at 5:33 pm in reply to: Rangemaster Professional 110 Serial No.6327 – grill element #298139
Washman
ParticipantRe: Rangemaster Professional 110 Serial No.6327 – grill elem
Hi
From Masterpart special offer booklet Rangemaster part no P038435 is that the one.
Mike
Washman
ParticipantRe: Bosch precision WFG2420 – non functioning
Hi
Get the Bosch looked at its 100 times better than the Hoover machine.
Washman
Washman
ParticipantRe: Whirlpool T/L 3RLSU8000JQ3 No Go
Hi
Have you checked the inline fuse in wiring harness
Mike
Washman
ParticipantRe: Beko Washing Machine
Hi
You need to check the bolts on the front counter weight,unplug from socket and tilt machine back to see if weight is loose. If so bolts will need tightening or they may have broken off.
Mike
Washman
ParticipantRe: Easilogic 6100s Door boot
Hi
Its a Servis made by Vestel.
Mike
Washman
ParticipantRe: Siemens XLM 1200 washing machine water level
Hi
The module is preset . If you mess with the level control then have a flood because of this , your insurance company will refuse to pay up.
Mike
Washman
ParticipantRe: customer wants money back!!!
HI
Remember to take the new part of and refit faulty part.
Mike
Washman
ParticipantRe: servis m6712w
HI
Most likely the electronic module failed.
Mike
Washman
ParticipantRe: Asko W/M
Hi
Model number would be a help.
Mike
Washman
ParticipantRe: luxair extractor hood
Hi
Luxair UK Ltd
Units 2 to 5
Barker Business Park
Melmerby
01765 641888
01765 641889
info@luxairhoods.com
http://www.luxairhoods.comHope this helps,
Mike
Washman
ParticipantRe: Bosch SGI4512gb/23 check water light
Hi Martin
Yes flow is OK water flows in and overfills, triggering pump to keep starting and stopping.
Mike
Washman
ParticipantRe: Bosch Double Oven HBN13M560B/03 FD8609/000072
Hi
Its most likely a neon lamp .and they will glow sometimes with no power on .
Washman
Washman
ParticipantRe: Servis M6513S – cant pull the top off?
Hi
There should be 2 bolts recessed into the back section of the top that go through to the front facia.Undo these and pull top towards the rear of machine.
And unplug from mains first.
Washman
ParticipantRe: TDS cd rom
Hi
I have have it running on Vista basic Ok with no problems.
Mike
Washman
ParticipantRe: TDS cd rom
Hi
Try part no DSTDVD2009V1 from CONNECT £15.96
Mike
-
AuthorPosts
