Forum Replies Created
-
AuthorPosts
-
Washman
ParticipantRe: Got my suppressor, wtf does it go
Hi
If you need to ask where the suppressor is, how did you ckeck it to see if its faulty.
Mike
Washman
ParticipantRe: Servis washing machine Mod M6713W
Hi
It is posible to fit the top big connector block and small block the wrong way round , as the key on the block is the same both ways. If connected the wrong way machine will not work , it does not do any damage to board I have done this a couple of times when distracted by customer.
Mike
Washman
ParticipantRe: Servis M9503s W/Dryer.
Hi
This machine must still be under guarrantee with that serial number.
Mike
Washman
ParticipantRe: Whirlpool American Dryer 3RLEC8646KQ1
Hi
Have a look here Appliancejunk.com Just type in model number and it brings up parts diagrams . The part numbers and drawing numbers are no good as Whirlpool UK use different numbering for parts and drawing numbers but it may help.
Mike
September 10, 2008 at 5:05 pm in reply to: Cancellation of Contracts Made in a Consumer’s Home #262049Washman
ParticipantRe: Cancellation of Contracts Made in a Consumer’s Home
Hi
So what happens if you repair a machine for the customer , and it comes to say £100.00 . You carry out the repair take the money and leave, then 6 days later the customer decides they then do not want the repair, they’ve within their cooling off period .
Or do you have to go look at the machine quote for repair then wait for 7 days for customer to decide if they want the repair caried out.
Mike
Washman
ParticipantRe: Electrolux camping fridge – failed – repairable?
Hi
Your question was answered in your previous post
http://www.ukwhitegoods.co.uk/modules.p … ic&t=36409Mike
Washman
ParticipantRe: Servis washing machine Mod M6713W
Hi
M6713W only shows one module 546089200 which is the Janus module.
MikeWashman
ParticipantRe: Servis washing machine Mod M6713W
Hi
This machine has the Janus programmable module , when you switched the machine on did you allow the button module enough time to reprogram the main module. You have to allow at least 30 seconds for this without touching any buttons.
Mike
September 6, 2008 at 1:18 pm in reply to: Decisions decisions- Aeg favorit Hot or cold feed? #261864Washman
ParticipantRe: Decisions decisions- Aeg favorit Hot or cold feed?
Hi
It will wash much better with a cold water supply.
Mike
Washman
ParticipantRe: Hotpoint Mistral Plus (top door seal)
Hi
Whats the model number and serial number.
Mike
Washman
ParticipantRe: servis m2010 dryer timer
Hi
Looking on the service manual it should be just a straight swap.
Mike
Washman
ParticipantRe: Whirlpool 3RLEC8646JQ td service manual
Hi
Thanks very usefull site for manuals , I found the manual that I needed.
Mike
Washman
ParticipantRe: Hotpoint WD640 F-13 Error on display
Hi
If you read the original post it is over 2 years old.
Washman
ParticipantRe: servis M6006 keeps on filling
Hi
Its a module fault have changed quite a few.
Mike
Washman
ParticipantRe: SERVIS 1000 keeps tripping our house RCD
Hi
Model Number and serial number please
Mike
-
AuthorPosts
