Washman

Forum Replies Created

Viewing 15 posts - 541 through 555 (of 894 total)
  • Author
    Posts
  • in reply to: Servis M3103A washing machine just spins :0( #236217
    Washman
    Participant

    Re: Servis M3103A washing machine just spins :0(

    Hi

    Its most likely a PCB fault.

    in reply to: Anyone good with fault diagnosis? #236040
    Washman
    Participant

    Re: Anyone good with fault diagnosis?

    Hi

    Give Servis a ring the serial number says it was made in week 20 of 2007,

    in reply to: Anyone good with fault diagnosis? #236038
    Washman
    Participant

    Re: Anyone good with fault diagnosis?

    Hi

    The model number and serial number would be a help and if its only 3 months old is still under guarantee.

    in reply to: beko WMA 765 W- resetting #235895
    Washman
    Participant

    Re: beko WMA 765 W- resetting

    Hi

    Just press and hold the start button for about 5 seconds or more and it should reset . it does say this in the user manual.

    Mike

    in reply to: Samsung Q1435V and 8E error #235784
    Washman
    Participant

    Re: Samsung Q1435V and 8E error

    Hi

    8E” is over current error , if motor not turning most likely PCB fault.

    Mike

    in reply to: Unusual ignition on Smeg gas Hob #233363
    Washman
    Participant

    Re: Unusual ignition on Smeg gas Hob

    Hi

    You need to get hold of a CORGI registered engineer for this , do not mess around with gas appliances, is it set up for mains or bottled gas.

    Mike

    in reply to: asko 12002 #233055
    Washman
    Participant

    Re: asko 12002

    Hi

    Part No 8050051 and 8050050 both £15.53 each plus , from Connect special order.

    Old machine this first made in 1989

    Mike

    in reply to: Daft Road Names #232158
    Washman
    Participant

    Re: Daft Road Names

    Hi

    Not far from me is a holiday camp called “Sandy Balls”

    Mike

    in reply to: APP6403 thermostat product change #232262
    Washman
    Participant

    Re: APP6403 thermostat product change

    Hi

    I think 546039400 is the part number you require. 546039402 is a different board manufacturer. 546039400 shows up for your model APP6403 on my parts info.

    Mike

    in reply to: washing machine unable to do a 60 degree wash ? #231618
    Washman
    Participant

    Re: washing machine unable to do a 60 degree wash ?

    Hi


    :waving: :waving:

    Mike

    in reply to: washing machine unable to do a 60 degree wash ? #231616
    Washman
    Participant

    Re: washing machine unable to do a 60 degree wash ?

    Hi

    Hot water hose needs to be connected , when on 60 deg wash or higher is selected it starts to fill with cold then changes over to hot water fill .If hot not connected machine will not advance as it is waiting for more water to be added. So connect hot water hose.

    Mike

    in reply to: Servis TSF601SS fan oven element #231607
    Washman
    Participant

    Re: Servis TSF601SS fan oven element

    Hi

    Correct model no is TSF60-1 SS , part no for fan element 524022100

    Mike

    in reply to: Zanussi ZKT641H ceramic hob – glass broken #230721
    Washman
    Participant

    Re: Zanussi ZKT641H ceramic hob – glass broken

    Hi

    I hope you are sitting down , the price is around about £300.00 for the new glass.

    Mike

    in reply to: samsung wm error code #230641
    Washman
    Participant

    Re: samsung wm error code

    Hi

    Its ” five” 5E which is water drain error.

    Mike

    in reply to: OLD SERVIS WM …M306 #230452
    Washman
    Participant

    Re: OLD SERVIS WM …M306

    Hi

    Part no 530001500 is the replacement for this one.

    Mike

Viewing 15 posts - 541 through 555 (of 894 total)